Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Landcruiser 60 Series diff ratio options

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1562
Joined: Sun Nov 21, 2004 7:26 pm
Location: Blue Mountains

Landcruiser 60 Series diff ratio options

Post by -Richo- »

Just wondering what diff ratios are available for 60 series housings, and can other model cruiser diffs be swapped in with ratios that may not be available in 60 series diff centres?

TIA

Yes i searched.....
Top
Posts: 189
Joined: Wed Sep 08, 2004 8:27 pm
Location: GYMPIE QLD

Post by rock hopper »

3.7 4.1 4.3 4.5

i have sold all 4 setups .
4.1 is std in most l/c
L.C. AUTOMOTIVE PH:0754827077
4x4 PARTS + ACCESSORIES
TYRE WHEELS & RADIATORS - A/C
1 DuRIETZ COURT GYMPIE 4570
Top
Posts: 552
Joined: Mon May 26, 2003 2:47 pm
Location: across the pond

Post by beanz2 »

Add 4.88 and 5.29...

Rockhopper, I didn't know the 4.30 is available for the older diff? I thought they were only for the 100 series diffs.

Dave
Top
Posts: 1562
Joined: Sun Nov 21, 2004 7:26 pm
Location: Blue Mountains

Post by -Richo- »

i spose the 5.29's are as rare as rocking horse crap? Are the 5.29's an aftermarket thing? if not what model 60's should i be looking for to get them?
Top
Posts: 552
Joined: Mon May 26, 2003 2:47 pm
Location: across the pond

Post by beanz2 »

Drop Bear wrote:i spose the 5.29's are as rare as rocking horse crap? Are the 5.29's an aftermarket thing? if not what model 60's should i be looking for to get them?
5.29 AFAIK is not a factory ratio, but aftermarket suppliers do have them. I don't know of Aus suppliers, but here is one in the States:
Click for Randy's Ring and Pinion.

BTW when they said "grind for cross pin", they were referring to the semifloater diffs. No need for grinding for full floaters.

Dave
Top
Posts: 1562
Joined: Sun Nov 21, 2004 7:26 pm
Location: Blue Mountains

Post by -Richo- »

Cheers for that Dave... i measured up the 4.11's i have and the crown wheel is 9" i thought cruiser diffs were only 8"? Whats the diff, apart from the dimensions? (pun intended :) )
Top
Posts: 552
Joined: Mon May 26, 2003 2:47 pm
Location: across the pond

Post by beanz2 »

Standard cruiser diffs are 9". Only the front on the 1990+ 70 and 80 series are 8" reverse cut. Bunderas also use 8" front and rear.

Cheers,
Dave
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 2 guests