Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
snorkel help
Moderators: toaddog, Elmo, DUDELUX
snorkel help
good evening boys and girls, i am stumped for ideas i am looking at fabricating a snorkel for the 40 and need help, now i have no problems with fabricating the external area and so on but i have no idea what sort of air box to adapt to the throttle body shes a 327 chev with straight gas mixer in place of the carb any help would be great
Sounds really dumb but I made an air box out of an old filter base and a couple of cake tins bolted together with a filter in.
The flexible pipes I got from Repco with a couple of filter pod brckets for a commodore !!
It worked really well, had a snorkel each side to get plenty of air in.
Say had cause the snorkels got smashed when it rolled and I have not rebuilt them yet.
The flexible pipes I got from Repco with a couple of filter pod brckets for a commodore !!
It worked really well, had a snorkel each side to get plenty of air in.
Say had cause the snorkels got smashed when it rolled and I have not rebuilt them yet.
[url]http://www.my4x4.com.au[/url]
Maybe a barrel / cyclone (whatever you call 'em) style airbox from a diesel hilux or cruiser, and work off that. That way, filters are readily available, and cheap. Should have plenty of capacity for a 327.
Sketch, note down the various diameters of things (gas mixer, airbox inlet etc....), and suss out what you need.
A good exhaust shop can make adapter pieces using tube expanders and reducers. Then get some wire reinforced flexy hose from Clark Rubber (bloody tough stuff, I use it), then some silicone hose and clamps and she'll come together...
Good Luck
Pat
Sketch, note down the various diameters of things (gas mixer, airbox inlet etc....), and suss out what you need.
A good exhaust shop can make adapter pieces using tube expanders and reducers. Then get some wire reinforced flexy hose from Clark Rubber (bloody tough stuff, I use it), then some silicone hose and clamps and she'll come together...
Good Luck
Pat
BIG.PAT
'92 Surf 2.4 TD 5 speed.
More Boost, Intercooled),
Body & sup lifts, 31x10.5 Simex M/Ts (Bigger soon) & Big Boomin Stereo!
More to come when the $$$$ sum.....
'92 Surf 2.4 TD 5 speed.
More Boost, Intercooled),
Body & sup lifts, 31x10.5 Simex M/Ts (Bigger soon) & Big Boomin Stereo!
More to come when the $$$$ sum.....
Who is online
Users browsing this forum: No registered users and 2 guests