Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Upgrade Impco 300A to what?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 340
Joined: Thu Dec 23, 2004 5:02 pm
Location: Canberra

Upgrade Impco 300A to what?

Post by gqswb »

I'm running a Impco 300A on my dual fuel 4.2 GQ carby, used to get about 300k's from a tank now 200-220ks. My mixer needs a rebuild so was thinking of upgrading it. Does anyone know about Sequential Vapour Injection? What our other people running, besides all the old school stuff?
Top
Posts: 3349
Joined: Tue Nov 23, 2004 10:29 am
Location: Not where you are

Contact:
Contact Gribble

Re: Upgrade Impco 300A to what?

Post by Gribble »

gqswb wrote:I'm running a Impco 300A on my dual fuel 4.2 GQ carby, used to get about 300k's from a tank now 200-220ks. My mixer needs a rebuild so was thinking of upgrading it. Does anyone know about Sequential Vapour Injection? What our other people running, besides all the old school stuff?
Its bit of a new science at the moment, which means its $$$.

I would rebuild your mixer and just keep running that. The impco 300A is a good mixer, 99% of ford taxis use it because of its reliability, keep that for now. ;)
\m/
Top
Posts: 340
Joined: Thu Dec 23, 2004 5:02 pm
Location: Canberra

Post by gqswb »

Made some phone calls today and your right I will keep it. I'm going to rebuild the mixer. Parts are only 60 bucks. Thanks
Top
Posts: 3054
Joined: Mon Nov 03, 2003 4:30 pm
Location: Melbourne

Post by hottiemonster »

can you please describe what parts are required etc, as it could be useful to others with the same setup on here, like me :D

thanks

Peter
Gq ute new built
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest