Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 series Gearing ?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 172
Joined: Thu Jul 15, 2004 7:34 am
Location: Denmark

Contact:
Contact Hobbz

80 series Gearing ?

Post by Hobbz »

What's the diff gearing on a 90/91 80 series wagon with 1HDT engine ?
Did a search but couldnt find what i was looking for ....
GQ 2.8TD. OME. 35 BFG. Fact. Rear Locker on steroids. Air Locker front. Gearmaster Reduction. 6HP Warn 8274.
Top
Posts: 1719
Joined: Sun Jan 25, 2004 11:45 am
Location: Brisbane

Contact:
Contact RV80

Post by RV80 »

They all have 4:1's
www.bolsys.com.au
Top
Posts: 552
Joined: Mon May 26, 2003 2:47 pm
Location: across the pond

Post by beanz2 »

Euro spec HDJ80s may also have a 3.70 ratio. What is your axle code? Check the build plate in the engine bay.

Dave
Top
Posts: 172
Joined: Thu Jul 15, 2004 7:34 am
Location: Denmark

Contact:
Contact Hobbz

Post by Hobbz »

i was just chasing some different gearing for a friends that has put a 1hdt engine and autobox in his GQ ... And he was thinking about using an 80 series rear axle so he could get his rear shaft lined up again ...
It's still at the "idea" stage ... ;)
GQ 2.8TD. OME. 35 BFG. Fact. Rear Locker on steroids. Air Locker front. Gearmaster Reduction. 6HP Warn 8274.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest