Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

head job on feroza

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Forum rules
Post Reply
Posts: 59
Joined: Sat May 28, 2005 2:27 am
Location: redfern,sydney

head job on feroza

Post by BORN2RUN »

hey guys jus wondering if you could help me out. im thinking of swappin the head on my feroza for the hd detomaso head. would there be any problems wif such a conversion?? on paper they look the same but would there be much difference in real life terms? or would it be better to jus send the factory head to be ported, polished, possibly shaved a few thou and a custom billet or reground camshaft fitted for better low down torque (from idle to bout 4000rpm). wat is better bang for buck in mods for na setup.
already have pod filter and full exhaust.
any info would be great.
Top
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Contact:
Contact murcod

Post by murcod »

From all the info posted about Detomaso's it appears the only head difference is the cam. I also read somewhere Ferozas have a different thicker head gasket- but don't know if that is correct?
David
Top
Posts: 59
Joined: Sat May 28, 2005 2:27 am
Location: redfern,sydney

Post by BORN2RUN »

murcod wrote:From all the info posted about Detomaso's it appears the only head difference is the cam. I also read somewhere Ferozas have a different thicker head gasket- but don't know if that is correct?
are you definately sure of this bro?? i sort of dont want too run into any problems wif such a job...also has anyone tried those electric superchargers thingys??
if you go for a belt driven blower where do you put it-wat pulley? i have 94 sx 11 wif no air.
Top
Posts: 82
Joined: Tue Aug 23, 2005 4:03 pm
Location: Limassol, Cyprus

Post by Sneezing7 »

I seriously doubt those electric "superchargers" do anything at all.

Don't waste your money...get a real supercharger!
Top
Posts: 145
Joined: Mon Jul 11, 2005 6:32 am
Location: Canberra Australia

Post by RobF300 »

there is a supercharger on ebay at the moment off a 1.6 charade, it may have the mounting brackets and all. would be perfect for the feroza...
Fear the mighty Daihatsu!
Top
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Contact:
Contact murcod

Post by murcod »

www.tighecams.com.au
David
Top
Posts: 59
Joined: Sat May 28, 2005 2:27 am
Location: redfern,sydney

Post by BORN2RUN »

murcod i hav heard a lot from the guys on daihard.org that the cam compnay you suggest isnt good due to dodgy workmanship and bad customer service. im thinkin of tryin someone here in sydney for cam specs but thanks for the suggestion dude.
the blower is prob wat im lookin at but mountin positon is the problem for me. wat shop do you suggest i see bout this preferably in sydney?
Top
Posts: 59
Joined: Sat May 28, 2005 2:27 am
Location: redfern,sydney

Post by BORN2RUN »

also robf300 couldnt find that blower that was on ebay bro. if you could tell we under wat title it was under or provide a link for me....only if can bro.thanx.
Top
Posts: 145
Joined: Mon Jul 11, 2005 6:32 am
Location: Canberra Australia

Post by RobF300 »

They seem to have taken it off :/
Fear the mighty Daihatsu!
Top
Post Reply

Return to “Ford / Mazda / Daihatsu / Homeless”

Who is online

Users browsing this forum: No registered users and 0 guests