Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

R150 Gear box problem

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 13
Joined: Wed Jun 23, 2004 7:43 pm
Location: kanwal

R150 Gear box problem

Post by Madmat »

Got a problem with my gear box I can`t get it into to first or second but can get it into the other gears,Did get it into first gear once and thats it
What could the problem be
Posts: 89
Joined: Fri Jul 15, 2005 9:01 am

Post by Bundy_Harry »

Sychros could be rooted
Transmission may be low on oil
Selectors may be gone

But I reckon it's your synchro's

sorry
Posts: 89
Joined: Fri Jul 15, 2005 9:01 am

Post by Bundy_Harry »

Sychros could be rooted
Transmission may be low on oil
Selectors may be gone

But I reckon it's your synchro's

sorry
Posts: 13
Joined: Wed Jun 23, 2004 7:43 pm
Location: kanwal

Post by Madmat »

I dump the oil there was enough to be at its right level and no glittery stuff or teeth came out
Twisted by Design
Posts: 2607
Joined: Tue Jul 15, 2003 12:52 pm
Location: Sunshine Coast QLD

Post by TWISTY »

As well as doing what yours is doing mine started making some crazy grinding noises under engine bracking. All my syncro's (1st, 2nd, 3rd)were rooted. I ended up doing a full rebuild (bearings, seals, & syncros), and its awesome now.
2012 FJ Cruiser
1984 BJ42 - Stretched and Coilovered
1977 HJ45
User avatar
HG
Posts: 450
Joined: Mon Aug 02, 2004 10:11 pm
Location: Mexico where the hills are big

Post by HG »

Ahhh the 151 gearbox hassel had me tossed for a while too.
Go to Toyota and get the little plastic cup for the base of the shifter & get the round plastic shifter washer/gasket that the shifter sits in.
This should cure your problems, try this first before you wrench the gearbox out (I did this first :lol: ), also dump your gearbox oil and put some fresh oil in. All up this should only set you back around $100.
This is all I ended up doing to mine and it worked ace.
Cheers
Andrew
----------------------
Just a few mods, nothing over the top.:)
Twisted by Design
Posts: 2607
Joined: Tue Jul 15, 2003 12:52 pm
Location: Sunshine Coast QLD

Post by TWISTY »

Actually, I had forgotten about doing that HG....I also did this to mine when the gearbox was rebuilt, and in my old 4runner, with good results.

There is a right up on Offroad.com if anybody else needs the info.
http://www.off-road.com/toyota/tech/shifter/index.html
2012 FJ Cruiser
1984 BJ42 - Stretched and Coilovered
1977 HJ45
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests