I live in the middle of the jungle in Papua New Guinea, and I am after engine specifications for the 4D55 and 4D56 diesel engines. I have a 4D56 engine, and a 4D55 engine overhaul kit available to me, will it do the job. I know the bore dia are the same, just stroke is different, but I also need the crank main and b/e specs, along with other engine specs. Can anybody help me out here. Cheers
FFROG
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Diesel engine specifications
Moderator: -Scott-
Lordtrunks,
Many thanks for your offer, greatly appreciated. I had a guy in the UK send me full engine specs and service info this morning for the 4D56 ( 2.84 mb worth), so anything I can get for the 4D55, turbo or otherwise is great. Looking forward to receiving the info. Again, many thanks for your help, and have a good day.
Regards
Graham
Many thanks for your offer, greatly appreciated. I had a guy in the UK send me full engine specs and service info this morning for the 4D56 ( 2.84 mb worth), so anything I can get for the 4D55, turbo or otherwise is great. Looking forward to receiving the info. Again, many thanks for your help, and have a good day.
Regards
Graham
Ok here you go was gonna scan it but machine broke so....
Bore 3.59
stroke 3.54
Compression 21.0:1
Valve specs
seat angle(deg.) 44.0-44.5
face angle(deg.) 45.0-45.5
spring test Presure(lbs. @in.) 62.0 @ 1.591
Spring installed height(in.) 1.591
Stem-to-guide clearance(in.) 0.0012-0.0024(intake) 0.0020-0.0035(exhaste)
Stem Diameter(in.) 0.3150(intake) 0.315(exhaste)
Crankshaft and connectiong rod specs
Main Brg. Journal Dia. 2.598
Main Brg. Oil clearance 0.0008-0.0020
Shaft end play 0.0020-0.0071
thrust No. 3
Connectiong rod
Journal Diameter 2.0866
Oil clearance 0.0008-0.0020
SIde clearance 0.0040-0.0100
ok i got like 2 more pages of stuff i'll see if i can fix this scanner i'm being kinda lazy.
Bore 3.59
stroke 3.54
Compression 21.0:1
Valve specs
seat angle(deg.) 44.0-44.5
face angle(deg.) 45.0-45.5
spring test Presure(lbs. @in.) 62.0 @ 1.591
Spring installed height(in.) 1.591
Stem-to-guide clearance(in.) 0.0012-0.0024(intake) 0.0020-0.0035(exhaste)
Stem Diameter(in.) 0.3150(intake) 0.315(exhaste)
Crankshaft and connectiong rod specs
Main Brg. Journal Dia. 2.598
Main Brg. Oil clearance 0.0008-0.0020
Shaft end play 0.0020-0.0071
thrust No. 3
Connectiong rod
Journal Diameter 2.0866
Oil clearance 0.0008-0.0020
SIde clearance 0.0040-0.0100
ok i got like 2 more pages of stuff i'll see if i can fix this scanner i'm being kinda lazy.
89 3.0 2dr auto, locked, tbars cranked,2"BL, 35's rollbar no top aisin hubs
Who is online
Users browsing this forum: No registered users and 1 guest