Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

ifs swap on 100 series

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1826
Joined: Wed Mar 03, 2004 9:14 pm
Location: nsw

ifs swap on 100 series

Post by plowy »

as i know the hilux ifs hub swap to the live axle makes it wider
can the same be done on the 100 series to get the same effect or not

and yes i have tried the search button :bad-words:
Top
Posts: 1826
Joined: Wed Mar 03, 2004 9:14 pm
Location: nsw

Post by plowy »

anyone , dumbdunce even?
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

Completely different chassis, from 100 series to 105 series...the live axle 105 is actually a 80 chassis with longer body mount arms....the ifs 100 uses more negitive offset rims, so the ifs will be wider and need these different rims or the others will make it wider again....bit like putting ifs under lux and usiong rfs hilux wheels....too wide.
Andrew
Top
Posts: 1826
Joined: Wed Mar 03, 2004 9:14 pm
Location: nsw

Post by plowy »

thanks dow5or i am chasin width tho ive got a 100 series live axle to jam under the old 42 and im wanting low , wide and flexible and was curious on either ifs hubs

flipping rims

or wheel spacers
atleast with ifs hubs its a factory equipment
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

sorry didnt realise you wanted to swap hubs only... i dont think so.
Andrew
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest