Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Swamper rim question

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 398
Joined: Fri Oct 25, 2002 5:40 am
Location: near gosford,central coast, nsw

Swamper rim question

Post by cplux »

has anyone run a 13/36/16 swamper on an 8" wide rim?? is it possible they are listed for 10" rim, talking offroad use and very limited onroad.

thanks
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

I think it would be ok (depending on real size)
In one way it would be good as the tyre would have more natural pressor against the rim. So it wouldn`t need as much air in it as say a 12.5 wide tyre would (well thats the theary anyway)
Top
User avatar
POS
Posts: 4318
Joined: Tue Oct 22, 2002 8:52 pm
Location: Perth

Post by POS »

I ran 35/14.5x15 tsl BOGGERS on a 8 inch rim!

I use to run them on very low pressure's of about 2 or 3 psi.

I never rolled on of the rim (no beadlocks)!
Top
Posts: 398
Joined: Fri Oct 25, 2002 5:40 am
Location: near gosford,central coast, nsw

Post by cplux »

i think they would be ok, just after opinions
Top
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Contact:
Contact NICK

Post by NICK »

i did, i had the 33.13 TSL and it was on an 8 inch rim. i never had a problem and run low tyre pressure a fair bit.

NICK
TECH SCREW GURU
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests