hi gh everyone....
im i did the head gasket in my 2H deisel last week.....
anyway iv got a new head and all the gaskets i need to bolt it back on....
what i need to know is does anyone out there know the settings for tensioning the head down.....and any other setting or info i need to know about putting the head back on.
all healp is greatly apprectiated.shit i cant spell
scotty
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
please help i need some settings.
Moderators: toaddog, TWISTY, V8Patrol, Moderators
please help i need some settings.
if you stand still ill drive over you
the spec in the max ellery book for a 2h says 83 ft-lb
doesn't sound alot
also u know to start in the middle and work your way out in a spiral form too pays too spray some hylomar on the head gasket for a good seal
you can get hylomar at repco
hylomar as in high low mar
inlet valve 0.20mm or 0.008 tho
exhuast 0.36mm or 0.014tho
also get a quicker responce for these things on the toyota section or search have fun
doesn't sound alot
also u know to start in the middle and work your way out in a spiral form too pays too spray some hylomar on the head gasket for a good seal
you can get hylomar at repco
hylomar as in high low mar
inlet valve 0.20mm or 0.008 tho
exhuast 0.36mm or 0.014tho
also get a quicker responce for these things on the toyota section or search have fun
head work
hey man thanks for that.
those figures do sound low...but come to think of it when i undid the head bolts they whernt ultra tight....small rachet and they where all lose.
scotty
those figures do sound low...but come to think of it when i undid the head bolts they whernt ultra tight....small rachet and they where all lose.
scotty
if you stand still ill drive over you
Who is online
Users browsing this forum: No registered users and 1 guest