Thought some one may be interested!!!!
http://www.trademe.co.nz/Trade-Me-Motor ... 149108.htm
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
PTO Winch for Sale in NZ
I'm seriously looking into plasma rope, mainly because I feel it is safer, and no problems with crushing, but I don't use the winch much.
Can get it for under $6/m for 8mm, so will probably give it a go and keep the steel cable in the back for back up. Will also get a cover for the winch to avoid uv damage and crap when not in use.
Dave
Can get it for under $6/m for 8mm, so will probably give it a go and keep the steel cable in the back for back up. Will also get a cover for the winch to avoid uv damage and crap when not in use.
Dave
Yup, it is. The centre shaft has a set of splines on the end just like your front axle, with free wheel hub system to engage / disengage. The problem is, they are not able to be disengaged when it is under load....changing the engagment system to something like an air operated diff locker would be great.Is that just a free-wheeling hub being used for the engagement of the drum?
Lever operated like Toyota Landcruiser PTO winch with a coarse dog gear on the end for engagement??
Thats not too bad compared to the standard Nissan one, as it easily allows you to set up an air-ram to move the lever (operated from inside the cab), so you can throw it into freespool while your co-driver is still getting out of the truck, then engage it again without him having to run back to the truck to do it. Will atke some pics of a mates 70 series L/C with that setup.
We're going for the dog-gear engagement (air-ram operated) on our PTO, as we're extending the drum for more capacity, so need a longer centre shaft anyway. Running out of time and money to do anything else.
Thats not too bad compared to the standard Nissan one, as it easily allows you to set up an air-ram to move the lever (operated from inside the cab), so you can throw it into freespool while your co-driver is still getting out of the truck, then engage it again without him having to run back to the truck to do it. Will atke some pics of a mates 70 series L/C with that setup.
We're going for the dog-gear engagement (air-ram operated) on our PTO, as we're extending the drum for more capacity, so need a longer centre shaft anyway. Running out of time and money to do anything else.
mmm never thought of that. Keen to see some pics and costing when you guys get this setup.
As even though I dont do comps its hard explaining to people, how to engage it. Well it seems hard, to me its easy. And this way it would be much easier to just get them to feed the cable out while I flick the switch.
As even though I dont do comps its hard explaining to people, how to engage it. Well it seems hard, to me its easy. And this way it would be much easier to just get them to feed the cable out while I flick the switch.
THOUGHT FOR THE DAY....
Who is online
Users browsing this forum: No registered users and 2 guests