Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Spring over rear axle on 98 Rodeo

Tech talk for GMH/Isuzu and Great Wall owners

Moderator: Moderators

Post Reply
Posts: 1578
Joined: Wed Aug 31, 2005 12:27 am
Location: In The Good Country

Spring over rear axle on 98 Rodeo

Post by sudso »

Anyone know if there is a spring over axle kit available for an R9 series rodeo? It's a V6 if that matters.
By the looks it would give about 4-5" of lift although I'm really only after 2-3".
It has 6 leaves in total and dont sag even with a bit of a load so I'm thinking I might avoid the cost of new springs to get some lift and get those brackets and bolts away from the ground further.

There might be a thread somewhere already on this that I have'nt seen.
Are there any problems associated with this type of lift?
Bordertrek 4X4 & Fabrication
0400 250 734 Bordertown SA
I love terra firma-the less firma the more terra
Posts: 1578
Joined: Wed Aug 31, 2005 12:27 am
Location: In The Good Country

s o a

Post by sudso »

just looked at big hairs post on spring over axles for the Rodeo.

Might just see if extended shackles will do the trick.
Bordertrek 4X4 & Fabrication
0400 250 734 Bordertown SA
I love terra firma-the less firma the more terra
Posts: 593
Joined: Sat Nov 09, 2002 8:06 pm
Location: Traralgon Vic Aust.

Post by DAZZ »

If you SPOA the rear then the front will be too low and have no flex.

Then you will have to SAS the front. Not all bad though.
2" lift is obtainable with a play around with the rear leaf packs and a crank of the torsion bars. :cool:
09 Cruiser Tray ARB Bull Bar/side bars, dual batts, 3" Superiour lift, MTZs, other stuff. More to come!!!
90 Sierra Soft top, 3" body 2" spring lift, 31" Claws, 5.14 Calmini, more to do.
Posts: 1578
Joined: Wed Aug 31, 2005 12:27 am
Location: In The Good Country

sprung

Post by sudso »

2" lift is obtainable with a play around with the rear leaf packs and a crank of the torsion bars.
Dazz, what do you mean exactly by a play around with the rear leaves.

I'm now just thinking (it hurts) of getting or making some greasable extended shackles and "helper springs"
Bordertrek 4X4 & Fabrication
0400 250 734 Bordertown SA
I love terra firma-the less firma the more terra
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Post by Tiny »

get your springs reset or replace them with 2" lifted springs & wind up the torsion bar
If the above post did not offend you in any way please PM me so I can try harder!!
Posts: 1578
Joined: Wed Aug 31, 2005 12:27 am
Location: In The Good Country

SOA

Post by sudso »

get your springs reset or replace them with 2" lifted springs & wind up the torsion bar
They dont really need resetting as they "bow" well and hold a load well.
Just trying to find out some way of lifting the chassis 2" or so up from the springs
Bordertrek 4X4 & Fabrication
0400 250 734 Bordertown SA
I love terra firma-the less firma the more terra
Posts: 1578
Joined: Wed Aug 31, 2005 12:27 am
Location: In The Good Country

soa

Post by sudso »

spring rate is good so I'm looking into leaf assisted airbags now for the lift
Bordertrek 4X4 & Fabrication
0400 250 734 Bordertown SA
I love terra firma-the less firma the more terra
Posts: 1570
Joined: Mon Aug 02, 2004 9:38 am
Location: Dalby

Post by Utemad »

I thought air bags were to help carry a load not to give lift.
Posts: 1578
Joined: Wed Aug 31, 2005 12:27 am
Location: In The Good Country

airbags

Post by sudso »

I thought air bags were to help carry a load not to give lift.
Thats what I originally thought but a susp. supplier/fitter told me that the Firestone bags give lift. They are the same as used on trucks and buses only for light commercial vehicles. Mine would go between axle and bumpstop with some bags having their own internal bumpstop.

He explained they work something like this:
You load nearly a ton in the back of the ute with little or no air in the bags.
The springs sag a bit of course so you pump air in the bags and it can raise it up about 3 - 4" which can finish higher than the usual height of the vehicle when it's got no load in the back and no significant air in the bags.
I've searched other forums and owners of these do claim some lift with them.
They are a bit dearer than poly airbags but they're a different material.
You've probably seen buses and coaches let air out on the door sides to let passengers on and off but if I got them I dont think I would bother with in cab controls.

I just like the idea of having adjustable ride height to suit the load/terrain etc. without going to the expense of lifted springs and adjustable coilover shocks etc. I think there'd be a slight loss of susp. travel though with these bags.

I will keep sussing out the claims of lift with the F bags guess I'll want to see one in action 1st. The susp. bloke told me where a Rodeo like mine is for sale that has the Firestone bags so I should check it out.
I will.

Will post my findings after i seen them work.
Bordertrek 4X4 & Fabrication
0400 250 734 Bordertown SA
I love terra firma-the less firma the more terra
Posts: 1570
Joined: Mon Aug 02, 2004 9:38 am
Location: Dalby

Post by Utemad »

Those buses have proper air suspension though like a Range Rover. Not leafs with helpers. I would have thought that if you were to put an airbag between your bumpstops and used it to increase the ride height then you would need a considerable amount of weight on it so as not to ride like you have no suspension at all. As in really rough. Another point would be as you want to gain height I would assume this height is to improve your ute offroad. However I would also think that the airbags would really bugger up your wheel travel. As on one side your axle is already lower so using up part of your wheel travel already and on the other side you have something impeding your axles upward movement.

Just my opinion. I've never actually used this setup.
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Post by Tiny »

the air bags will not allow flex, steer away from these
If the above post did not offend you in any way please PM me so I can try harder!!
Posts: 1578
Joined: Wed Aug 31, 2005 12:27 am
Location: In The Good Country

airbags

Post by sudso »

Those buses have proper air suspension though like a Range Rover. Not leafs with helpers. I would have thought that if you were to put an airbag between your bumpstops and used it to increase the ride height then you would need a considerable amount of weight on it so as not to ride like you have no suspension at all. As in really rough. Another point would be as you want to gain height I would assume this height is to improve your ute offroad. However I would also think that the airbags would really bugger up your wheel travel. As on one side your axle is already lower so using up part of your wheel travel already and on the other side you have something impeding your axles upward movement.

Just my opinion. I've never actually used this setup.
the air bags will not allow flex, steer away from these
Both right.
I will steer clear of these and just get lifted springs and maybe extended shackles too.
Dont know what the supplier was thinking when he suggested these alone for lift :?
Thanks for the advice ;)
Bordertrek 4X4 & Fabrication
0400 250 734 Bordertown SA
I love terra firma-the less firma the more terra
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests