I've done a search and couldnt find any relevant information on installing a pirhana system on a GQ patrol. Does anyone out there have basic installation instructions or can send me somewhere that does?
Cheers
Simon
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
pirhana electronic ignition
Moderator: -Scott-
It fairly easy, to do you need a bench grinder though.
Wiring: Just Follow the wiring instructions
Dizzy: \
1. Disconnect loom running out of the dizzy (cable tied to top radiator hose from memory)
2. Take apart dizzy, take out points etc (save them they can be put back in with a screwdriver while halfway up a track)
3. Put a GOOD philips head srewdriver down the middle of the shaft, and undo the screw, this removes the top half of the shaft, you have to use a bench grinder or similar to grind the collar thing (you will know what I mean when you see it) down so that you can fit the six slotted disk over it.
4. Put the shaft back on, then just put in the optical sensor and chpper disk on at the same time and screw it all back together.
Dont forget your rotor
On that note, while your at it get an extended rotor gives you better spark.
If you have any more questions let me know or if you need a hand let me know, Im in rowville, bring me a six pack and I'll help you do it (used to fit heaps when I worked at Piranha)
Brendan
Wiring: Just Follow the wiring instructions
Dizzy: \
1. Disconnect loom running out of the dizzy (cable tied to top radiator hose from memory)
2. Take apart dizzy, take out points etc (save them they can be put back in with a screwdriver while halfway up a track)
3. Put a GOOD philips head srewdriver down the middle of the shaft, and undo the screw, this removes the top half of the shaft, you have to use a bench grinder or similar to grind the collar thing (you will know what I mean when you see it) down so that you can fit the six slotted disk over it.
4. Put the shaft back on, then just put in the optical sensor and chpper disk on at the same time and screw it all back together.
Dont forget your rotor
On that note, while your at it get an extended rotor gives you better spark.If you have any more questions let me know or if you need a hand let me know, Im in rowville, bring me a six pack and I'll help you do it (used to fit heaps when I worked at Piranha)
Brendan
thanks brendan.
I'm buying the kit 2nd hand through OL so i dont even have wiring instructions
http://www.outerlimits4x4.com/PHP_Modul ... hp?t=54842
does everything look to be there?
thanks again for your help
Simon
I'm buying the kit 2nd hand through OL so i dont even have wiring instructions
http://www.outerlimits4x4.com/PHP_Modul ... hp?t=54842
does everything look to be there?
thanks again for your help
Simon
Who is online
Users browsing this forum: No registered users and 1 guest