Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

need help with 60 series leaf springs

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 27
Joined: Tue Jul 05, 2005 7:26 pm
Location: brisbane QLD

need help with 60 series leaf springs

Post by bigboystonkatoy »

hi guys the situation is that i have a 45 series tube tray ute with 60 series springs and the springs are to stiff therefor limiting my travel and being uncomfortable to ride in. i was going to take some of the leaves out but i don't want to drop the height to much... anyone got any ideas??

cheers Drew
Top
Posts: 1732
Joined: Tue Feb 11, 2003 11:23 am
Location: Goulburn

Post by MY45 »

Remove a few of the smaller leaves from the bottom...2 or 3 then test it and keep removing untill you find a good compromise.

If you remove a longer leaf (3rd from the top is a good one) it will change the spring rate more than a short one.
----HillBilly Engineering----
Top
Posts: 27
Joined: Tue Jul 05, 2005 7:26 pm
Location: brisbane QLD

springs

Post by bigboystonkatoy »

cheers mate i'll get stuck into it tomorrow
Drew
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest