Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Bundera Wheel Arch Flares

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 215
Joined: Wed Aug 06, 2003 9:29 am
Location: Perth, WA

Bundera Wheel Arch Flares

Post by Skip »

Does anyone know where you can buy these things new?

Or anyone got a secondhand set they want to offload?

Cheers
JZJ71G
Twin Turbo Cruiser
Top
Posts: 314
Joined: Tue Nov 25, 2003 3:43 pm
Location: Sunny Coast

Post by BundyMonkey »

I thought TJM and ARB would have them under the 70series
Before All toys there was the Landcruiser
Top
Posts: 89
Joined: Fri Jul 15, 2005 9:01 am

Post by Bundy_Harry »

For factory flares and mudguards your best bet would be a wrecker. You can still buy them from Toyota (new) but they are horrendously expensive about Sydney City toyota quoted me 863.50 per corner about 6 months ago. I bought a whole bundera with flares for less than that.

I would suggest looking for a cheap vehicle to wreck for your own parts, ring around and surf the net for parts recyclers (wreckers) or even Fibreglass panel shops like the one below I have seen some of the products and it is really top quality

http://www.frp.com.au/stock.htm

get them to send you an email with pictures you should be surprised and a hell of lot cheaper then OEM toyota parts

cheers Bundy harry
Top
Posts: 215
Joined: Wed Aug 06, 2003 9:29 am
Location: Perth, WA

Post by Skip »

$863.50 per corner, that would be the gold plated guards yeah?

ARB was a no go, id say TJM wouldn't have them either.

Might be time to hunt around the wreckers.
JZJ71G
Twin Turbo Cruiser
Top
Posts: 215
Joined: Wed Aug 06, 2003 9:29 am
Location: Perth, WA

Post by Skip »

Rang all the wreckers in Perth, located a set for the front but still nothing for the rear dammit!!
JZJ71G
Twin Turbo Cruiser
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

Skip wrote:Rang all the wreckers in Perth, located a set for the front but still nothing for the rear dammit!!
rears off 70/73/74/75 series should fit, see if you can get a half kit from TJM. if you need flares and want to offroad, I would just get rubber flex flares, they don't snap when you drive them into a tree.
Free air locker to the first 20 callers!
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 57 guests