Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Centre bearing troubles

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 442
Joined: Thu Nov 11, 2004 12:14 pm
Location: Boomba boys drive bodied rigs

Centre bearing troubles

Post by batcho101 »

Hey guys jsut got a question abtou the centre bearings on Lux's...Has anyoen had any trouble with them not lasting very long? I have gone through 2 in 4500k's one was stuffed by a stick jamming into it and the other has had the bearing collapse back into the rubber which causes the rear driveshaft to go all over the place on take off and when backing off.
Oh its in a 1984 single cab lux with ifs rears and a welded rear.
any help woudl be appreciated because driveline services think its my driveshaft causing the problem but i am not sure whether that si the case or i just got a faulty one.
regards batcho101
84lux-project. A-frame, 350 chev, turbo 350 auto, duals, rears up front, crossover, twin locked and a 118" wheelbase
Top
Posts: 187
Joined: Mon Apr 11, 2005 9:26 pm
Location: Rockhampton, QLD

here is a way to make the bearing last a little longer...

Post by kevdog »

easy solution.... get a one piece shaft made up...

or... my lifted v6 lux ( and my bro's as well) used to spit centre bearings regularly... but when you buy your new one get a tube of sikaflex and pump it full of the stuff... makes em last twice as long..
Fat people are harder to kidnap....
Top
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Post by bazooked »

dude ur shaft is way out of balance, and ur welded rear wont help especially if ya have soft rear springs.
Top
Posts: 442
Joined: Thu Nov 11, 2004 12:14 pm
Location: Boomba boys drive bodied rigs

Post by batcho101 »

but the thing is that there is only a banging noise on take off and then after that i dont get any vibrations through the driveline which i think is weird if the shaft is that badly out of balance. Is there any lux's with a one piece shaft that woudl fit mine? i have moved the rear diff back 1.5-2 inches if that helps. if it is gonna cost me a lot to have the shaft balanced plus a new centre bearing i might jsut get one made up anyone got an idea on price? oh and i have a trac bar going in soon which will help to control the soft springs and welded rear
84lux-project. A-frame, 350 chev, turbo 350 auto, duals, rears up front, crossover, twin locked and a 118" wheelbase
Top
Posts: 3299
Joined: Fri Nov 08, 2002 8:28 am
Location: Sydney

Post by spazbot »

get a 1 piece jobby made, i got one in my rear, costs bout $200 - $400 for one if u pull ur shaft otu and give em the mesuremnts flange to flange for what u want
www.overkill4x4.com
ph 94766137
Top
Posts: 442
Joined: Thu Nov 11, 2004 12:14 pm
Location: Boomba boys drive bodied rigs

Post by batcho101 »

Just got off the phone to driveline services and they are doing me a good deal...The centre bearing at cost $45 + new unis $25 + balancing.
this sounds good to me
84lux-project. A-frame, 350 chev, turbo 350 auto, duals, rears up front, crossover, twin locked and a 118" wheelbase
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest