Or can you just use rubbers and a center tube spacer in a flat normal hole?
Larry.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
body mounts
Moderators: toaddog, TWISTY, V8Patrol, Moderators
body mounts
Does anybody know , for engineers , do they require a self centering bucket style hole for the body mount rubbers?
Or can you just use rubbers and a center tube spacer in a flat normal hole?
Larry.
Or can you just use rubbers and a center tube spacer in a flat normal hole?
Larry.
I hope not. Those poxy things rust out heaps easy.
I had the ones on the 2 outriggers under the firewall almost to the point where the rubbers were pushing thru the chassis. Plated 'em up with 3mm gal
but i would make the hole big enough to re-use the crush sleeve to save the bolt from shearing (no sheep involved)
I had the ones on the 2 outriggers under the firewall almost to the point where the rubbers were pushing thru the chassis. Plated 'em up with 3mm gal
but i would make the hole big enough to re-use the crush sleeve to save the bolt from shearing (no sheep involved)Who is online
Users browsing this forum: No registered users and 1 guest