Tech Talk for Mitsubishi owners.
Moderator: -Scott-
Posts: 2832 Joined: Sat Oct 26, 2002 3:15 pm
Location: Ringwood East, VIC
Post
by RoldIT » Wed Sep 21, 2005 8:53 pm
KRiS
Posts: 123 Joined: Mon Aug 16, 2004 6:07 pm
Location: Down Under - Sid a nie
Post
by .:Dave:. » Wed Sep 21, 2005 9:35 pm
I chucked a bid on, but in your opinion, how much is too much.
Also, how much approximatly would the install be;
Cheers
Dave
--
93 NH - Custom Bar - Uniden GPS 205 - IPF Spoties - The Blue Smoke Comes Standard
http://www.mpdconstructions.com
http://www.whiteovergreen.com
Posts: 2832 Joined: Sat Oct 26, 2002 3:15 pm
Location: Ringwood East, VIC
Post
by RoldIT » Wed Sep 21, 2005 11:04 pm
Pretty sure $300 install is the going rate.
New they are worth about $1k so I'd say $600 or so is probably still a decent price. All depends on what it's worth to you ...
KRiS
Posts: 123 Joined: Mon Aug 16, 2004 6:07 pm
Location: Down Under - Sid a nie
Post
by .:Dave:. » Thu Sep 22, 2005 5:46 pm
Well i had a stab at it,
But there is not much i can on a uni students budget
Saw Hekta in there for a while, almost got it too;
Will have to do a body lift instead
93 NH - Custom Bar - Uniden GPS 205 - IPF Spoties - The Blue Smoke Comes Standard
http://www.mpdconstructions.com
http://www.whiteovergreen.com
Posts: 6314 Joined: Wed Jun 18, 2003 9:49 am
Location: Newcastle, NSW
Post
by Hekta » Thu Sep 22, 2005 10:38 pm
Yeah
so which one of you fawkers beat me
wtf is an acronym
[color=yellow]Ctrl + W[/color]
Posts: 123 Joined: Mon Aug 16, 2004 6:07 pm
Location: Down Under - Sid a nie
Post
by .:Dave:. » Wed Oct 05, 2005 10:02 pm
Just an Update
There is a Factory Locka here
http://www.trademe.co.nz/Trade-Me-Motor ... 243581.htm
(in NZ though)
Best of luck
Dave
93 NH - Custom Bar - Uniden GPS 205 - IPF Spoties - The Blue Smoke Comes Standard
http://www.mpdconstructions.com
http://www.whiteovergreen.com
Users browsing this forum: No registered users and 1 guest