Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

How to lift a transfercase???

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 443
Joined: Tue Oct 12, 2004 10:45 am
Location: Sailsbury-Brisbania

How to lift a transfercase???

Post by JrZook »

Hi all,
Just wondering who's out there that has lifted there tcase, so it is now at least inline with the bottom of the chassie rails. So it doesnt get snagged on rocks and other obsticals. Any pics or info would be great.
Cheers Dan
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

Searchy

http://www.outerlimits4x4.com/PHP_Modul ... t=transfer
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 2066
Joined: Mon Jun 09, 2003 8:17 pm
Location: Gympie

Post by Rhett »

I just lowered my chassie rails by 25mm and run a flat skid plate through to stop it getting snaged
Its a wheelbase thing
Top
Posts: 779
Joined: Tue Sep 02, 2003 8:17 pm
Location: Penrith, N.S.W

Post by markil »

I changed the standard mounts to engine moutns from a skyline on the side with two mounts and a cortina 1 on the other side. My Transfer sits flush or higher than the chassis rail now if i remmeber correctly (can't check as it's outta the car at the moment). But the handbrake drum still sits under the rails slightly, but i found this to be a really good mod as I have a LWB and at the time had no lift so i was getting snagged on it alot.

Mark.
Mark.
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

markil wrote:I changed the standard mounts to engine moutns from a skyline on the side with two mounts and a cortina 1 on the other side. My Transfer sits flush or higher than the chassis rail now if i remmeber correctly (can't check as it's outta the car at the moment). But the handbrake drum still sits under the rails slightly, but i found this to be a really good mod as I have a LWB and at the time had no lift so i was getting snagged on it alot.

Mark.
Do you know what skyline/cortina model they were from. i am guessing a R30.

cheers
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 1977
Joined: Sat Oct 16, 2004 7:49 pm

Post by OldGold »

if it is, remember VLs have rb30s too
Top
Posts: 443
Joined: Tue Oct 12, 2004 10:45 am
Location: Sailsbury-Brisbania

Post by JrZook »

markil wrote:I changed the standard mounts to engine moutns from a skyline on the side with two mounts and a cortina 1 on the other side. My Transfer sits flush or higher than the chassis rail now if i remmeber correctly (can't check as it's outta the car at the moment). But the handbrake drum still sits under the rails slightly, but i found this to be a really good mod as I have a LWB and at the time had no lift so i was getting snagged on it alot.

Mark.
Cheers mate.
Yea just was wondering, since mine is a swb with no body lift and a 1L tcase, if those mounts would fit as well. Wouldnt have a pic by any chance?
Thanks Dan
Top
Posts: 779
Joined: Tue Sep 02, 2003 8:17 pm
Location: Penrith, N.S.W

Post by markil »

I don't recall which model skyline or cortina mounts they were, but i'll see what i can do to find out tomorrow if i remember. I don't have a bodylift on mine either, but with a bodylift it would be much better/easier. I had to to do a bit of "remodelling" to the surrounding bodywork of mine, and then i just managed to fit it back up there. My xfer is a 1.3 litre model also.

Cheers, Mark.
Mark.
Top
Posts: 779
Joined: Tue Sep 02, 2003 8:17 pm
Location: Penrith, N.S.W

Post by markil »

double post :oops:
Last edited by markil on Wed Sep 14, 2005 9:56 pm, edited 1 time in total.
Mark.
Top
Posts: 169
Joined: Tue Sep 23, 2003 1:37 pm
Location: New Zealand home of the warriors

Post by Luigi Malone »

I have lifted mine with 2X2 square tube. Easy to do, the T case sits on its original bushes. The T case is above the chassis rails. I dont have a drum on the T case.
LM
It's better to have LIVED for a day than to have EXISTED for a hundred years.
Top
Posts: 223
Joined: Sat Sep 27, 2003 5:10 pm
Location: NW Sydney, NSW

T-case lift

Post by Impulsive »

Only thing about doing this is it will make the drive shaft angles more radical. particularly if you're using SPOA or similar. It may expediate the destruction of the universal joints as well.

Having said that, I still reckon it's a great idea, and it's a common mod for TJ Wranglers. Don't know about other models. My mate has a TJ and was thinking about it.

Cheers,

Adam
1998 Vitara Hard Top 2.0 EFI
65mm springs (by Allsprings)
35mm body lift
Rancho RS9000's
235's on 15in alloys
Flipped strut mounts
Top
Posts: 443
Joined: Tue Oct 12, 2004 10:45 am
Location: Sailsbury-Brisbania

Re: T-case lift

Post by JrZook »

Impulsive wrote:Only thing about doing this is it will make the drive shaft angles more radical. particularly if you're using SPOA or similar. It may expediate the destruction of the universal joints as well.

Having said that, I still reckon it's a great idea, and it's a common mod for TJ Wranglers. Don't know about other models. My mate has a TJ and was thinking about it.

Cheers,

Adam
Well have thought about this, the drive shaft angles, but what happens when you do a spring lift? You change the angle of the driveshafts. Since i have only a moderate lift of 2 inch, hopefully a inch lift on the tcase shouldnt do too much carnage to the unis. Overall wouldnt the driveshaft angles equal that of a 3 inch spring lift. How about diff wedges? Can you get these? Would solve a bit of the castor problems up front and fix the angles a bit.
Cheers, Dan
Top
Posts: 443
Joined: Tue Oct 12, 2004 10:45 am
Location: Sailsbury-Brisbania

Re: T-case lift

Post by JrZook »

Impulsive wrote:Only thing about doing this is it will make the drive shaft angles more radical. particularly if you're using SPOA or similar. It may expediate the destruction of the universal joints as well.

Having said that, I still reckon it's a great idea, and it's a common mod for TJ Wranglers. Don't know about other models. My mate has a TJ and was thinking about it.

Cheers,

Adam
Well have thought about this, the drive shaft angles, but what happens when you do a spring lift? You change the angle of the driveshafts. Since i have only a moderate lift of 2 inch, hopefully a inch lift on the tcase shouldnt do too much carnage to the unis. Overall wouldnt the driveshaft angles equal that of a 3 inch spring lift. How about diff wedges? Can you get these? Would solve a bit of the castor problems up front and fix the angles a bit.
Cheers, Dan
Top
Posts: 443
Joined: Tue Oct 12, 2004 10:45 am
Location: Sailsbury-Brisbania

Re: T-case lift

Post by JrZook »

Site crashed on me, soz!!
Last edited by JrZook on Wed Sep 21, 2005 10:54 pm, edited 1 time in total.
Top
Posts: 443
Joined: Tue Oct 12, 2004 10:45 am
Location: Sailsbury-Brisbania

Post by JrZook »

opps quadripple post
Last edited by JrZook on Wed Sep 21, 2005 10:52 pm, edited 1 time in total.
Top
Posts: 169
Joined: Tue Sep 23, 2003 1:37 pm
Location: New Zealand home of the warriors

Post by Luigi Malone »

Well JrZook, it sounds as though you have given this some thought, yes?
LM.
It's better to have LIVED for a day than to have EXISTED for a hundred years.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 85 guests