Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
icom 700 Hf/Vhf/Uhf connections
Moderator: -Scott-
icom 700 Hf/Vhf/Uhf connections
just got a icom 700 but have no idea how to connect an antena? Do i need a few or can i get 1 to do the job. Any body know about this radio?
jr
I'm impressed with their UHF radios and I would consider their HF rig if I didn't allready have a Codan.
The antenna impedance has to be changed for each frequency that you want to transmit on. You would usually use an autotune antenna or a multi tap antenna.
The multi tap is cheaper, but you have to get out of the truck to change the tap when you change the transmit frequency. And you need to buy one to suit the frequencies that you want to use.
The multi tap antennas made by Frankston and Mornington Peninsula Amature Radio Club (www.qsl.net.vk3frc) for approx $120 (depending on the number of taps) have a very good reputation and unbeatable value.
I'm guessing that you may want taps for the VKS 737 and Radphone frequencies.
For more convenience (and $$) you will want an autotune antenna. As far as I know, Icoms use an autotune from Moonraker Australia, so you might try contacting Moonraker.
The antenna impedance has to be changed for each frequency that you want to transmit on. You would usually use an autotune antenna or a multi tap antenna.
The multi tap is cheaper, but you have to get out of the truck to change the tap when you change the transmit frequency. And you need to buy one to suit the frequencies that you want to use.
The multi tap antennas made by Frankston and Mornington Peninsula Amature Radio Club (www.qsl.net.vk3frc) for approx $120 (depending on the number of taps) have a very good reputation and unbeatable value.
I'm guessing that you may want taps for the VKS 737 and Radphone frequencies.
For more convenience (and $$) you will want an autotune antenna. As far as I know, Icoms use an autotune from Moonraker Australia, so you might try contacting Moonraker.
John
Who is online
Users browsing this forum: No registered users and 16 guests