Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

1990 GQ front wheel bearings and swivel bearings

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 157
Joined: Wed Mar 24, 2004 11:03 am
Location: Rochedale, Brisbane QLD

Contact:
Contact coke

1990 GQ front wheel bearings and swivel bearings

Post by coke »

I have just pulled the front out of my car to install new disk rotors (DBA329 - $70 ea) and find that I need to replace all the wheel bearings (2 each side) and the swivel hub bearings (top and bottom) too.

Ringing around today I get the following quotes. If anyone knows of any better, please let me know...

BURSONS $115 per side, swivel bearings $185 both sides (4)
WYONG BEARINGS $111.80 per side, swivel bearings $226 both sides (4)
ABC BEARINGS $104.50 per side, swivel bearings $190 both sides (4)

and

NISSAN $127 per side, swivel bearings $47 ea = $188 both sides (4)

I think I might go genuine and save time stuffing around with possible wrong parts. Nissan went off my chassis number.

THEY'RE ALL DAMNED EXPENSIVE THOUGH!

Andrew
GQ Safari High Roof, MANUAL, 33s, 3" lift, CD, Nardi Wheel, bullbar, rack. 2.5m of sheer intimidation...
Top
Posts: 2097
Joined: Mon Jun 14, 2004 8:06 pm
Location: Land of Plenty

Post by blkmav »

I just paid $220 for the swivel housing kit and $150 for the bearing kit
Weekdays - Prado GXL D4D with some stuff
Weekends - Mav shorty with lots of stuff
Top
Posts: 157
Joined: Wed Mar 24, 2004 11:03 am
Location: Rochedale, Brisbane QLD

Contact:
Contact coke

Post by coke »

can I ask who that was through? Also, was the bearing kit per side or for both sides, meaning that you paid $370ish for what I am about to pay Nissan $430ish for?

Andrew
GQ Safari High Roof, MANUAL, 33s, 3" lift, CD, Nardi Wheel, bullbar, rack. 2.5m of sheer intimidation...
Top
Posts: 368
Joined: Tue Jan 18, 2005 12:06 am
Location: scotland

Post by lexi »

All these prices are pants! Here in Scotland Nissan wanted £92 for main wheel bearing each. Bearing supplier did exact same Koyo bearing no. For £18. Kingpin were £36 from Nissan and £10 from supplier. Koyo bearings are not expensive so shop around.
Alex
Top
Posts: 2097
Joined: Mon Jun 14, 2004 8:06 pm
Location: Land of Plenty

Post by blkmav »

coke wrote:can I ask who that was through? Also, was the bearing kit per side or for both sides, meaning that you paid $370ish for what I am about to pay Nissan $430ish for?

Andrew
Prices I paid the mechanic and they were for both sides ie: $370 the lot
Weekdays - Prado GXL D4D with some stuff
Weekends - Mav shorty with lots of stuff
Top
Posts: 157
Joined: Wed Mar 24, 2004 11:03 am
Location: Rochedale, Brisbane QLD

Contact:
Contact coke

Post by coke »

Just got off the phone with Central Coast Bearings and they car doing the following for me.

Front wheel bearings (2 each side) for $73.50 a side plus GST
Swivel Hub bearings for $19.60 each plus GST.

Total $249.70 for all the bearings. Good deal old chaps.

Andrew
GQ Safari High Roof, MANUAL, 33s, 3" lift, CD, Nardi Wheel, bullbar, rack. 2.5m of sheer intimidation...
Top
Posts: 1072
Joined: Thu Jun 17, 2004 4:38 pm
Location: Port Macquarie

... Bad deal...

Post by JemmyBubbles »

Get on Ebay there is a dude who sells a genuine full bearing kit for the front end of a patrol for like $150..

Can't be assed finding link but.... cheap...
[quote="MSCHIF"]SPUA its like shaving a barbie dolls head, amusing but pointless.[/quote]
Top
Posts: 3054
Joined: Mon Nov 03, 2003 4:30 pm
Location: Melbourne

Re: ... Bad deal...

Post by hottiemonster »

JemmyBubbles wrote:Get on Ebay there is a dude who sells a genuine full bearing kit for the front end of a patrol for like $150..

Can't be assed finding link but.... cheap...
yeah i have seen it a few times, is $165
Gq ute new built
Top
Posts: 157
Joined: Wed Mar 24, 2004 11:03 am
Location: Rochedale, Brisbane QLD

Contact:
Contact coke

Post by coke »

Also I don't think that that includes the 4 small king pin bearings. Anyway, I am very happy with the price I paid. I am reinstalling the drivers side this morning with new rotors and seals so the whole front diff is basically refurbished now.

Hope that fixes my problems...

Andrew
GQ Safari High Roof, MANUAL, 33s, 3" lift, CD, Nardi Wheel, bullbar, rack. 2.5m of sheer intimidation...
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 3 guests