Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

LPG / Petrol switch

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 63
Joined: Fri Feb 20, 2004 4:10 pm
Location: Melbourne

Contact:
Contact djmickyg

LPG / Petrol switch

Post by djmickyg »

hello..
i need to know the wires on the back of my petrol. gas switch with level display.. its an AEB

it has 7 wires

im guessing there is

+ve
-ve
sensor in
sensor out ?
fule cut
gas cut
gas cut for the tank end??

thanks
Top
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Contact:
Contact Beastmavster

Post by Beastmavster »

The lpg/petrol switch itself will be a 3 wire job and the rest of the wires are for the level display.
Top
Posts: 63
Joined: Fri Feb 20, 2004 4:10 pm
Location: Melbourne

Contact:
Contact djmickyg

Post by djmickyg »

switch and level display are in the one unit?
or u mean the other 4 wires run to to the tank?
Top
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Contact:
Contact Beastmavster

Post by Beastmavster »

O'd have to drag mine out it's in boxes in the garage so someone else might be able to do it for you a bit easier.

My switch for lpg petrol was a 3 wire standard off (neutral) LPG (on up) Petrol (on down) switch.


Dunno about wires of the fuel sender since they stuffed them up when it was installed so it never worked properly anyway LOL.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest