Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
I have a leak from the front transfer case seal. (Where the front drive shaft goes in) I popped a new seal in it yesterday at a cost of $6. No big deal..... you would think!!!
Today it's leaking again!!! When i had it on the hoist i noticed that all 3 front diff mounts were broken, im assuming the've gone since i put the 32" muddies on her. From what i can gather the diff is moving back due to the broken mounts and forcing the drive shaft into the transfer case and stuffing the seal.
My question is.... has anyone else encountered this problem??? I'm going to replace the mounts anyway (what a mission) however i was just wondering if anyone had done this repair or have any ideas on the subject?
I replaced my front diff mounts a few months ago yes it was a big job. Do a search Frank gave me the kelpro part numbers they cost around $30.00 each genuine $90.00. Take the brackets off and the new mounts to Pedders at Burleigh and they can press them out and new ones in, cost me about $40.00. Not really a hard job just time consuming if you like you can give me a call on 0418688074 I also live on the Gold Coast.
