Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

outer cv boot replacement

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 918
Joined: Fri Jul 22, 2005 12:49 pm
Location: canberra

outer cv boot replacement

Post by 460cixy »

ok so how do uoi get the shaft out of the cv? got a workshop manual and it only discribes how to do the inner. help
range rover & series one landy!
Top
Posts: 104
Joined: Wed Feb 16, 2005 2:32 pm
Location: Gold Coast

Post by glenn_c »

There is a spring clip around the inside of the cv, remove it and the shaft with the inner cv will then come out. Then on the end of the shaft is a circlip remove it and then remove the inner cv from shaft.
Regards Glenn
Pajero GLX 2.8td 255/85/16 BFG muds 265/75/16 BFG AT's, articulator, 2.5inch lift, ball joint flip, rear sway bar disconnect and lots of mods.
Top
Posts: 918
Joined: Fri Jul 22, 2005 12:49 pm
Location: canberra

Post by 460cixy »

well that seems very simple. wonder why the book says otherwise.
range rover & series one landy!
Top
Posts: 918
Joined: Fri Jul 22, 2005 12:49 pm
Location: canberra

Post by 460cixy »

well that seems very simple. wonder why the book says otherwise.
range rover & series one landy!
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 1 guest