Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

shackles... had some made up.

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Post Reply
Posts: 184
Joined: Wed Jul 16, 2003 2:08 pm
Location: Melbourne

shackles... had some made up.

Post by icebreaker »

Well after months of wanting.. A mate of mine finally made some up for me.

I'm hoping the steel is thick enough so that the shackle is stong enough to withstand whatever it is going to take... I'm guessing only time will tell though.

I've wound up the front RHS, but couldn't crack the top nut on the front LHS, so i'm hoping to get that done today or tommorrow, either with an oxy or a rattle gun or both if it's that stuburn..
You do not have the required permissions to view the files attached to this post.
'94 Daihatsu Feroza II SX
'00 KawasakiZX6R
Posts: 281
Joined: Sat Dec 20, 2003 5:45 pm
Location: Gold Coast - Pac Pines

Post by Bowhunter »

looks good mate, hope they hold up for ya! :D

Luke ;)
[url=http://www.aussiebowhunter.com][b]Founder TBGA - September 29, 2001 - Australia's Premier Bowhunting Site[/b][/url]
Posts: 2910
Joined: Thu Jan 02, 2003 4:32 pm
Location: Brisbane

Post by -Mick- »

how much longer are they :?: :?
Posts: 184
Joined: Wed Jul 16, 2003 2:08 pm
Location: Melbourne

Post by icebreaker »

from memory it was about 80mm longer, with a brace in the center.
'94 Daihatsu Feroza II SX
'00 KawasakiZX6R
Posts: 2910
Joined: Thu Jan 02, 2003 4:32 pm
Location: Brisbane

Post by -Mick- »

icebreaker wrote:from memory it was about 80mm longer, with a brace in the center.
cool.... they looked longer in the pic :cool:
Posts: 184
Joined: Wed Jul 16, 2003 2:08 pm
Location: Melbourne

Post by icebreaker »

well it's about double from eye to eye really..
'94 Daihatsu Feroza II SX
'00 KawasakiZX6R
Posts: 184
Joined: Wed Jul 16, 2003 2:08 pm
Location: Melbourne

Post by icebreaker »

my only concern was the leafs look flat as a tack, but having just had a look through some old photo's i've noticed something curious.. my front was higher than the back... And when dialing up the front end on the weekend, I noticed the front has already been wound up abit...

So not i'm thinking the rear parabolic springs have been reset at some point and have sagged like a mofo... Or pos. are just saggy like an old womans b00bs.. hehehe

Might have to go hunting for some other springs, and then put a smaller shackle on...

She does handle 100x better on the road though, with the weight pushed on the front abit, it was abit of a battle to keep it rolling in a straight line on the highway, but she certainly seems to be alot smoother now.... *shrugs*
You do not have the required permissions to view the files attached to this post.
'94 Daihatsu Feroza II SX
'00 KawasakiZX6R
Posts: 65
Joined: Sun Sep 25, 2005 10:07 pm
Location: Ipswich, QLD

Post by lkgrainger »

Thats prob half my problem with m back up high and the nose wound up as high as it can go. Wanders a bit on the highway.
SWB Maverick
3in Sus lift, 2in Body lift. Sitting on 33in Bighorns.
Posts: 24
Joined: Mon Jul 25, 2005 10:09 am
Location: wellington New Zealand

Post by crazymanwithavan »

hi icebreaker,
aside from the differences in height, has there been any change in articulation?
Posts: 184
Joined: Wed Jul 16, 2003 2:08 pm
Location: Melbourne

Post by icebreaker »

not sure mate, I haven't been off road at all yet, or tried testing it to notice any change..
'94 Daihatsu Feroza II SX
'00 KawasakiZX6R
Post Reply

Who is online

Users browsing this forum: No registered users and 51 guests