Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Frontaxle left side is leaking (from inner side) :(((

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 5
Joined: Tue Oct 04, 2005 4:00 am
Location: Vilnius, Lithuania

Frontaxle left side is leaking (from inner side) :(((

Post by krukis »

From the first sight it is broken O-ring rubber selaer- is it much work to change it?
Thnx
92' Patrol Y60 GR (GQ) RD28T LWB
Top
Posts: 314
Joined: Sun Oct 17, 2004 7:46 pm
Location: Melbourne

Post by AndrewPatrol »

Stand to be corrected but I think there are three oil seals per side, two in outer hub area and one inside axle housing, could be any one. Probably make more sense to change all if you're gonna open it up. Get seals from a bearing supplier, Nissan ones are very expensive.
Top
Posts: 3
Joined: Thu Jun 10, 2004 1:46 am
Location: The Netherlands

Post by Rob B »

If it is leaking oil, the seal on the inside on the drive shaft has to be changed.
That is the only seal that stops the oil from the diff to get to the CV housing.
The large seals on the outside stops the grease coming out and water coming in.
Top
Posts: 72
Joined: Tue Jul 27, 2004 10:35 pm
Location: Brisbane

Post by smitty »

I just did my steering knuckle kit about 2 months ago. It was leaking from on the seal on the inner of the steering knuckle. ( from the bit thats looks like a ball.) The kits i got was about $150. Fairly good to install. Replaced all seals and bearings. Afterwards oil leak > GONEEE.......
Top
Posts: 368
Joined: Tue Jan 18, 2005 12:06 am
Location: scotland

Post by lexi »

smitty wrote:I just did my steering knuckle kit about 2 months ago. It was leaking from on the seal on the inner of the steering knuckle. ( from the bit thats looks like a ball.) The kits i got was about $150. Fairly good to install. Replaced all seals and bearings. Afterwards oil leak > GONEEE.......

Yeah so you replaced axle shaft oil seal as well as all the other seals. As Rob says when oil leaks from knuckle flange it is axle shaft oil seal. All other seals are to keep grease in and water out.
Alex
Top
Posts: 72
Joined: Tue Jul 27, 2004 10:35 pm
Location: Brisbane

Post by smitty »

Y not do the job right and do renew all seals while you are there? Check your bearings in the knuckle too. They can get a bit hows ya father. They should come in the kit if you decide to do them.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests