Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

power steering leak (i think)

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 325
Joined: Sun May 08, 2005 4:55 pm
Location: melbourne

power steering leak (i think)

Post by mudmav »

i have a leak that is running down the passenger side chassis rail when i get under the car their is power steering fluid all over the bottom of the air con compressor tightened all hoses and checked for splits. nothing wrong with anything stops leaking for like 50 km then starts again any ideas cant actually see were it is leaking from
andrewholmes
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

I guess youve got a GQ???????????

It will be hose leaking esp when turning hard.
Cost about $90 from Enzed, Hose doctor etc to rebuild yours with old fittings and new better grade hose.

Remember to take weight off wheels when bleeding. Also let fluid settle so bubbles come out for an hour or so if hard to bleed or noisy.. Then bleed again if necessary.

Bazzle
Posts: 709
Joined: Thu Sep 22, 2005 7:49 pm
Location: campbelltown

Post by Mousie »

i got the same bloody problem
i just been toping it up being too lazy
R.A.G, Ruff As Gutts 4x4 club :P
http://www.rag4x4.com/
Posts: 1072
Joined: Thu Jun 17, 2004 4:38 pm
Location: Port Macquarie

...

Post by JemmyBubbles »

As bazzle said go aftermarket enzed or pirtek could repair. Genuine nissan replacement high pressure line was around the $290 mark when I was ringing around to work out what the heck was going on.

I know this leak well I had my steering box replaced with a big late model GQ one. A week later a new leak developed and I was about to tear shreds out of the installer. But I got someone in the car to turn the wheel from lock to lock and the high pressure line was jizzing everywhere...
[quote="MSCHIF"]SPUA its like shaving a barbie dolls head, amusing but pointless.[/quote]
Posts: 98
Joined: Thu Aug 04, 2005 6:57 pm
Location: Sydney

Post by JeSTeROCK »

Mine was leaking on the low pressure side. A bracket holding the low pressure side had worn through the metal pipe.

Soldered it up and now is all good
88 GQ SWB 6" Lift 35s + a few scars
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests