Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

IFS box mounting kit for lux

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 1340
Joined: Sat Feb 15, 2003 8:29 pm
Location: ACT

IFS box mounting kit for lux

Post by diesel028 »

Where can i get a template for the plates that are welded to the chassis rails for the IFS box to mount to in a x/over conversion??

Cheers

Craig
Top
Posts: 1055
Joined: Sun Nov 16, 2003 3:46 pm
Location: Inala Ponds

Post by basketcase »

http://www.superiorengineering.com.au/p ... category=4

There ya go.
Top
Posts: 1340
Joined: Sat Feb 15, 2003 8:29 pm
Location: ACT

Post by diesel028 »

Yeah, ive seen that before, but im not paying $110 for a small plate of steel and a few bolts sorry. Plus its only one plate. I wanna reinforce inside and outside the chassis rails.
Top
Posts: 1544
Joined: Fri Jan 03, 2003 10:33 am
Location: Wahgunyah(REDNECK WONDERLAND) Victoria

template

Post by Webbie »

Just clamp you box where you want it then get some cardboard put it up to your chasis and trace the shape of the chasis and include the extra bit that goes above the chasis rail to accomedate the 3rd bolt.Its not rocket sceince its where the box fits best ,then once you have done that do one for the inside rail.I just made a set for my 1st gen lux ;) :)
Lockers or Knockers ,both will make for fun.

HYBRID 4B PRDUCTS Visit Tigerz11 here http://www.tigerz11.com.au/ and LOCKTUP 4x4 here http://www.locktup4x4.com.au/ cheers

www.trailtrack4x4.com
Top
Post Reply

Return to “Hilux”

Who is online

Users browsing this forum: No registered users and 4 guests