Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Maxxis CRAWLER ?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 1404
Joined: Tue Jan 07, 2003 9:20 pm
Location: Sitting on Miss Janes lap.

Maxxis CRAWLER ?

Post by Drafty »

Ok so what do people think about these tyres. We were given a set to run at this weekends Dargo Navrun but we have a few concerns after we put them on the rim and inflated them.
Joe.


To succeed, focus on the solution, not the problem.
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Is this what they call the Creepy Crawler?

I think i posted about these a while ago. They were going to be released in some real good sizes.

What are your concerns Joe?
Posts: 1404
Joined: Tue Jan 07, 2003 9:20 pm
Location: Sitting on Miss Janes lap.

Post by Drafty »

We put them on the GQ and lowered the pressures down to 0 psi and they hardly even bulged. The rubber is as hard as it took us nearly an hour to get it on the rim using tyre plyers and heaps of soap.
Joe.


To succeed, focus on the solution, not the problem.
Posts: 1404
Joined: Tue Jan 07, 2003 9:20 pm
Location: Sitting on Miss Janes lap.

Post by Drafty »

Our concern is with on road handeling, take a look at photo 07 that is at 35 psi, didn't change much when at 25 either. Patern and compound apear to be good, just the tread surface when inflated is a bit of a worry. :?
Joe.


To succeed, focus on the solution, not the problem.
User avatar
POS
Posts: 4318
Joined: Tue Oct 22, 2002 8:52 pm
Location: Perth

Post by POS »

So you have them to use, for nothing! :cool:

I would run them and flog the bejesus out of them and if they fall apart send em back and tell em what you think! :lol:

As for road handling :shock: Have fun! :lol: :lol:

Maybe drive them around on the streets at low pressure's of say 3 or 4 psi to see if the soften up!

The tread looks fairly good!
Posts: 1404
Joined: Tue Jan 07, 2003 9:20 pm
Location: Sitting on Miss Janes lap.

Post by Drafty »

Up close the patern is a compromise between the ET and the MTR, would have been good at the OBC on the sand, nice wide foot print. Might try the low pressure trick and see if it has any effect. As they are l think it will be like driving on tram tracks or ice for those non mexicans, all over the place.
Joe.


To succeed, focus on the solution, not the problem.
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Post by hypo »

they look ok tread wise. does the tread sit flat wen fitted 2 a car ??? and as POS said drive em round a paddock at 0psi 4 a few kilometers and try and soften them up.

how thick is the side wall ??

BTW i like the rim that its mounted 2 :D
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Posts: 1404
Joined: Tue Jan 07, 2003 9:20 pm
Location: Sitting on Miss Janes lap.

Post by Drafty »

The side wall felt about 2 or 3mm thicker than the simex tyres which came of the rim. I think they are super tuff, just the tread shape is a worry.

Thanks, everyone takes a fancy to the rims, they look real shweeet on the GQ.
Joe.


To succeed, focus on the solution, not the problem.
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Post by hypo »

yeah they look good i wood love a set 4 my lux :D
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

what make and model are the rims?
Posts: 1404
Joined: Tue Jan 07, 2003 9:20 pm
Location: Sitting on Miss Janes lap.

Post by Drafty »

Hypolux that can be arranged, l will PM you the price tomorow.

Make and model. :? Stuffed if l know. l know they have a big offset.
Joe.


To succeed, focus on the solution, not the problem.
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Post by hypo »

cool drafty thanx mate, can i get them with beadlox ?? and can i get a custom offset ?? let me know in the PM
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Posts: 1361
Joined: Thu Oct 24, 2002 8:47 pm
Location: Now in a happy place.

Post by Cheezy4x4 »

Those tyres were in my factory for a few days and we had a good look at em, I think the tread and rubber compound is good for rocks but are way to heavy in the walls. :shock:
NOW ABLE TOO SAY WHAT I WANT WITHOUT FEAR OF LOOSING SALES.
The person who says it cannot be done should not interrupt the person doing it.
Posts: 3299
Joined: Fri Nov 08, 2002 8:28 am
Location: Sydney

Post by spazbot »

give me your 37mtrs then ben
www.overkill4x4.com
ph 94766137
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Post by bj on roids »

what size is the tyre?? It looks pretty cool, and a heavy sidewall is good as OBC guys know!! ;)
hands and mums dont count!!!
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Post by N*A*M »

drafty you got the hook ups now bro :cool:
Posts: 1361
Joined: Thu Oct 24, 2002 8:47 pm
Location: Now in a happy place.

Post by Cheezy4x4 »

They come in 10 sizes ranging from 33x12.5 up to 38.5x14.5. :D
NOW ABLE TOO SAY WHAT I WANT WITHOUT FEAR OF LOOSING SALES.
The person who says it cannot be done should not interrupt the person doing it.
Posts: 1404
Joined: Tue Jan 07, 2003 9:20 pm
Location: Sitting on Miss Janes lap.

Post by Drafty »

Cheezy did you put one on rim?
Joe.


To succeed, focus on the solution, not the problem.
Posts: 139
Joined: Fri Feb 21, 2003 12:22 pm
Location: Sydney

Post by tritonasuras »

Those rims look very much like peco stars....
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

tritonasuras wrote:Those rims look very much like peco stars....


I think that is what they are.
Thats the style all the HQ race cars used to run isnt it?
Posts: 3523
Joined: Sun May 18, 2003 8:42 pm
Location: Somewhere they can't reach me, shoot me or electrocute me...

Post by Area54 »

Is the carcass radial or bias?
Built, not bought.
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

What is the cost on these Creepy Crawlers? and when will they be avaliable in Aus, or are they only going to be avaliable in limited distributors?

Shawn
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests