a bloke in our club has an o4 rodeo single cab and has just bought a set of radial claws in 33in. No worries about lifting the tray to fit under but was wondering what he needs to do to the front end. Wind up torsen bars only or will he need to do a body lift of an inch or two.
if a body lift is needed what other problems will be likely to occur, radiator and mounts, gear shifters etc.
any info will greatly be passed on
cheers george
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
33's under a 04 rodeo
Moderator: Moderators
33's under a 04 rodeo
2002GU Patrol, 3Lt TD, dtronic, 5" mannel extreme lift kit, rockhopper gears in auto box, Lightforce XGTs, 230 Lt fuel tanks, 35" BFG muddies, Rear drawers, opposite lock rear bar/tyre carrier& more
I don't know much about the RA but this is for my 97 Rodeo. Will give you some idea of bodylift at least.
http://www.outerlimits4x4.com/PHP_Modul ... hp?t=50512
As for suspension you can buy 2in lift rear leaf springs and the front I imagine you will only be able to wind it and then fit low profile bump stops. You can buy extended upper control arms for some Isuzus to give 3in in the front but you will then need to lower the front diff so you don't kill the CVs. Not sure if this still relates to an RA but I would think it does.
http://www.outerlimits4x4.com/PHP_Modul ... hp?t=50512
As for suspension you can buy 2in lift rear leaf springs and the front I imagine you will only be able to wind it and then fit low profile bump stops. You can buy extended upper control arms for some Isuzus to give 3in in the front but you will then need to lower the front diff so you don't kill the CVs. Not sure if this still relates to an RA but I would think it does.
Who is online
Users browsing this forum: No registered users and 1 guest