ok im putting in mq diffs (mattsmad) on my NT zuke. i have a question i hope can be answered;
im running hilux rear springs in the front, and three link a frame rear. will i need to SOA the front? it is a cast front diff and im thinkin quite difficult to weld new perches too etc...
would it just be easier to coil the front aswell?
cheers
Evan
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
mq conversion
mq conversion
turbos are nice but i'd rather be blown
i mean the zuk! is the zuk setup soa or suaMARKx4 wrote:Mattsmad sold those diffs so he could go soa. So i imagine that they are sua.redzook wrote:how is it set up now? spring under or over?
if it works why change it?
i dont care about the nissan they came from
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
I don't really understand the question?
SOA?
SUA?
or COILS
either way I'd say you will be welding, the long side won't be a problem. its not a cast tube, just the centre, like bazooked said.
if you need the height then spring over, if not leave it spring under.
don't coil it.
question asnwered maybe????
enjoy ashley
SOA?
SUA?
or COILS
either way I'd say you will be welding, the long side won't be a problem. its not a cast tube, just the centre, like bazooked said.
if you need the height then spring over, if not leave it spring under.
don't coil it.
question asnwered maybe????
enjoy ashley
build http://www.outerlimits4x4.com/ftopic130159.php&highlight=
IMHO = who cares if your Opinion is Humble! its your opinion isn't it?
so IMO it a waste of a H
IMHO = who cares if your Opinion is Humble! its your opinion isn't it?
so IMO it a waste of a H
ok, the zuke is setup RUF with hilux rears down back sua... i want to coil the rear (for experimental purposes) and was wondering if i would be better off going soa front, because it seems the best way to go (redzook).
goes to show that no one is a mind reader...i knew axactly what i wanted to say but no one else seemed too.
should have specified
goes to show that no one is a mind reader...i knew axactly what i wanted to say but no one else seemed too.
should have specified
turbos are nice but i'd rather be blown
NT spring spacings will not work on a standard MQ front axle housing. You would need to be WT spacing on the front.
The rear diff can be modded easily to accomidate NT spacing if you so wished.
The rear diff can be modded easily to accomidate NT spacing if you so wished.
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
God of Magnificant Ideas!
Ive done a fairly lengthy "HOW TO DO A SOA" in my members thread regarding MQ diffs..... but its an SOA on an MQ not a suzi..... principle is still the same tho....
http://www.outerlimits4x4.com/PHP_Modul ... php?t=7890
Kingy
http://www.outerlimits4x4.com/PHP_Modul ... php?t=7890
Kingy
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Who is online
Users browsing this forum: No registered users and 0 guests