Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

60 power steer water pump pulley onto a 45

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 407
Joined: Wed Mar 30, 2005 4:01 pm
Location: browns plains

60 power steer water pump pulley onto a 45

Post by Matt_88 »

would a 60 series power steer pulley that runs of the water pump fit onto the water pump on my 2f in a 45? im assuming the pulley is of a 2f?

cheers
NECKUPYAPARROT4x4

Tosa_03

Proudly sponsored by and part of:-

Tosa Racing Co.
Top
Posts: 1516
Joined: Wed Mar 10, 2004 3:36 pm
Location: melbourne australia

Contact:
Contact pcman

Post by pcman »

you might also need to swap to a 60 series water pump

i started looking into this for my own power steering setup but ended up custom mounting the pump so didnt need the doiubly pully
Top
Posts: 407
Joined: Wed Mar 30, 2005 4:01 pm
Location: browns plains

Post by Matt_88 »

k if i get the 60 water pump will it bolt straight onto my motor and will the inlet and outlets be the same
NECKUPYAPARROT4x4

Tosa_03

Proudly sponsored by and part of:-

Tosa Racing Co.
Top
Posts: 1516
Joined: Wed Mar 10, 2004 3:36 pm
Location: melbourne australia

Contact:
Contact pcman

Post by pcman »

theres a few different types you will be best off visiting a decent parts store and confirming that it will be the same as yours you may need to swap to 60 series fan aswell
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests