Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ Upper Radius Arms, retaining bolt.

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 1950
Joined: Mon Apr 18, 2005 2:15 pm
Location: While you were reading this I sent dirty text messages to your mum.

Contact:
Contact Mowie

GQ Upper Radius Arms, retaining bolt.

Post by Mowie »

I was under the GQ today and to my surprise I noticed that the one of the retaining bolts on drivers side upper radius arms was fucking missing :shock: Its the one that holds it above the axle housing.

The arm has now fallen free and is resting on the bracket on the axle housing. The one on the chassis end was still there but the nut was at the end of the thread. I've just had the bushes in them replaced a few days ago and they must haven't got around to tightening it, the passenger side was fine.

Now questions;

#1 I need a new bolt asap, where can I get one from right away.

#2 How safe am I just driving on the black stuff missing an upper radius arm in the rear suspension??

#3 Are the Upper Radius Arms the same for SWB and LWB, I'm under the impression they are.

Cheers.
[quote="chimpboy"]I might be reading that wrong, but it sounds like you are saying you want to come out of the closet and then rape my bottom or something..?
[/quote]
Top
Posts: 533
Joined: Sat Jan 15, 2005 4:54 pm
Location: Melbourne, Australia.

Contact:
Contact InSanE

Post by InSanE »

just call the company that changed it and tell them to send someone to fix it or send a towtruck out for you to transport your car to them
GQ LWB TD42, boost, lockers etc

http://forum.mudrhino.com.au/viewtopic.php?t=262&start=30
Top
Posts: 1950
Joined: Mon Apr 18, 2005 2:15 pm
Location: While you were reading this I sent dirty text messages to your mum.

Contact:
Contact Mowie

Post by Mowie »

No company, mates job

:cry:
[quote="chimpboy"]I might be reading that wrong, but it sounds like you are saying you want to come out of the closet and then rape my bottom or something..?
[/quote]
Top
Posts: 533
Joined: Sat Jan 15, 2005 4:54 pm
Location: Melbourne, Australia.

Contact:
Contact InSanE

Post by InSanE »

ahh ok then to make it easier for yourself just take the bolt out of the one on the other side and go to a bolt place and get a bolt and nut for it preferably a nylon locking nut and make sure they are high tensile steel atleast grade 8 - 9
GQ LWB TD42, boost, lockers etc

http://forum.mudrhino.com.au/viewtopic.php?t=262&start=30
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

All the same, top and bottom.

bazzle
Top
Posts: 303
Joined: Tue Mar 22, 2005 2:47 pm
Location: NZ

Post by DieselBoy »

Don't take the bolt out of the other side, take the bolt out of the other end of the loose one, they are both the same.
Dissconecting the other arm will make it bloody hard work to put it all back together again!!!!
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests