Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 series brake hoses.WARNING

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 63
Joined: Fri Feb 11, 2005 5:31 pm
Location: narangba

80 series brake hoses.WARNING

Post by squarebear »

i recently gave my cruiser a 2 in lift and removed front and rear sway bars .this was great gave me more travel. but the standard brake hose from chasis to diff housing is to short for the extended travel.. after a couple of times down at ormeau it fractured the hose .. result no brakes. i took the old hose to a brake shop and got them to extend it by 4 in or 100 mm only cost $50.00 . cheeper than $ 350.00 excess on insurance or worse dead
do it in the dirt .. unlocked 80 ser.2in.lift.285/75/16 b/stone at...one day go higher and locked
Posts: 1719
Joined: Sun Jan 25, 2004 11:45 am
Location: Brisbane

Post by RV80 »

I think i'll be checking mine now as i have the same set up..
www.bolsys.com.au
Posts: 63
Joined: Fri Feb 11, 2005 5:31 pm
Location: narangba

Post by squarebear »

yep worth checking..also check the hoses from housing to brake caliper. check for bulgers
do it in the dirt .. unlocked 80 ser.2in.lift.285/75/16 b/stone at...one day go higher and locked
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest