Tech Talk for Cruiser owners.
Moderators: toaddog , Elmo , DUDELUX
Posts: 16934 Joined: Sun Oct 20, 2002 6:57 pm
Post
by RUFF Sat Oct 15, 2005 6:21 pm
How wide is an 80 series rear diff? Measured from the Wheel Mount Surface to Wheel Mount Surface.
Posts: 3451 Joined: Tue Jan 28, 2003 8:57 pm
Location: NEWCASTLE
Post
by A1 Sat Oct 15, 2005 9:00 pm
I thought the 80 series WMS - WMS was 63" ...........
But i have been known to be way wrong
Dan
[b][i] DAN [/i] [/b]
Posts: 3924 Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW
Post
by hypo Sat Oct 15, 2005 10:14 pm
ill measure mine 2mora.
HYPOFAB
Thanks to:
Polyperformance
Yuri 4x4
Longfield
Posts: 4990 Joined: Sun Oct 20, 2002 7:22 pm
Location: Qld, Hilux Country
Post
by bubs Sat Oct 15, 2005 10:25 pm
i knew i had the info
bubs wrote:
the toy is still superior because it has an extra 5mm on the WMS
from my UZN thread, i meausured this when I bought the GQ rear
http://www.budscustoms.com.au
Posts: 3924 Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW
Post
by hypo Sun Oct 16, 2005 7:27 am
ok well there u go Tony, saves me running a tape over mine
thanx Bubs.
HYPOFAB
Thanks to:
Polyperformance
Yuri 4x4
Longfield
Posts: 16934 Joined: Sun Oct 20, 2002 6:57 pm
Post
by RUFF Sun Oct 16, 2005 8:50 am
bubs wrote: i knew i had the info
bubs wrote:
the toy is still superior because it has an extra 5mm on the WMS
from my UZN thread, i meausured this when I bought the GQ rear
Was that with Disc Rotors fitted?
Posts: 4990 Joined: Sun Oct 20, 2002 7:22 pm
Location: Qld, Hilux Country
Post
by bubs Sun Oct 16, 2005 10:26 am
yes, on a 80 front
http://www.budscustoms.com.au
Posts: 654 Joined: Mon Oct 27, 2003 1:24 pm
Location: singleton
Post
by CHOPZUKI Sun Oct 16, 2005 11:06 am
think he wants the rear measurement
Posts: 16934 Joined: Sun Oct 20, 2002 6:57 pm
Post
by RUFF Sun Oct 16, 2005 7:48 pm
CHOPZUKI wrote: think he wants the rear measurement
Yes im after the rear WMS-WMS. And before anyone replies they will be the same its unusual for the front and rear to be the same.
Posts: 2820 Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD
Post
by Daisy Sun Oct 16, 2005 8:26 pm
RUFF wrote: CHOPZUKI wrote: think he wants the rear measurement
Yes im after the rear WMS-WMS. And before anyone replies they will be the same its unusual for the front and rear to be the same.
would it help to measure the 80 that i drive to work? thats if you dont have the measurements by then
Posts: 826 Joined: Sat Mar 13, 2004 4:18 pm
Location: Northern NSW
Post
by slosh Sun Oct 16, 2005 8:30 pm
From the RTA fact sheet;
80 series wheel track front (0 offset rims)- 1595mm
wheel track rear (0 offset rims) - 1600mm
That's easier than going and measuring for you.
Posts: 16934 Joined: Sun Oct 20, 2002 6:57 pm
Post
by RUFF Sun Oct 16, 2005 8:40 pm
slosh wrote: From the RTA fact sheet;
80 series wheel track front (0 offset rims)- 1595mm
wheel track rear (0 offset rims) - 1600mm
That's easier than going and measuring for you.
Thankyou.
Posts: 4990 Joined: Sun Oct 20, 2002 7:22 pm
Location: Qld, Hilux Country
Post
by bubs Sun Oct 16, 2005 10:43 pm
so that makes a rear WMS of 1610mm and a front of 1605mm
http://www.budscustoms.com.au
Posts: 16934 Joined: Sun Oct 20, 2002 6:57 pm
Post
by RUFF Sun Oct 16, 2005 11:07 pm
bubs wrote: so that makes a rear WMS of 1610mm and a front of 1605mm
How did you work that out?
Looks like 1595 and 1600 to me
Posts: 4990 Joined: Sun Oct 20, 2002 7:22 pm
Location: Qld, Hilux Country
Post
by bubs Sun Oct 16, 2005 11:13 pm
i see what you mean, hmm, aza never was good at holding the tape
I will check tommorow, I have 2 80 rears and a 80 front atm
http://www.budscustoms.com.au
Users browsing this forum: No registered users and 1 guest
HYPOFAB 
thanx Bubs.
