Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Caster?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 6221
Joined: Tue May 31, 2005 12:51 pm
Location: Sydney

Caster?

Post by v840 »

In the middle of a springover on my 40 and I just wanted to double check the caster setting I should be aiming for. Its got standard springs, no body lift, 2in ext. shackles( I think) and will be running 35s. Im under the impression that I should be going for 1-2 degrees positive. Is this right or shoiuld I be going for more? After asking around some people have suggested up to 5 degrees positive (?) due to the bigger tyres. Just wanted to make sure as I like been able to steer! Any advice is greatly appreciated.
Cheers
|^^^^^^^^^^^^^^| ||
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
Top
Posts: 1768
Joined: Sun Mar 14, 2004 11:51 am
Location: Weipa

Post by crankycruiser »

When i did the flip arm to my 80 i set the castor at around 5 deg on my 80 and i think its a little too much as it some times gets the shakes at 60k's.. have asked around and they reckon this is from to much castor...

BTW i run 36's...

I reckon that 2-3 deg would be fine
Top
Posts: 1562
Joined: Sun Nov 21, 2004 7:26 pm
Location: Blue Mountains

Post by -Richo- »

Ive being doing some homework on caster myself as im going to rotate the knuckles on some 60s diffs i have for a project. From what i have learnt 3 degrees positive is about right, this is what ill be setting mine to anyway. Standard they are about 1-2 degrees i think.
Yurich Design Services
www.yds.net.au
Top
Posts: 6221
Joined: Tue May 31, 2005 12:51 pm
Location: Sydney

Post by v840 »

Cheers guys. Ill go with 1-2 degrees then (and hope). :D
|^^^^^^^^^^^^^^| ||
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
Top
User avatar
Tiny
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Contact:
Contact Tiny

Post by Tiny »

v840 wrote:Cheers guys. Ill go with 1-2 degrees then (and hope). :D
yeah 1 or 2 deg positive should be right
If the above post did not offend you in any way please PM me so I can try harder!!
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests