Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

recomendations for suspension in brisbane fitted

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 766
Joined: Sun Aug 01, 2004 7:16 pm
Location: brisbane

recomendations for suspension in brisbane fitted

Post by bruiser »

Want to do a 3 inch suspension lift on an 80 series cruiser.
Looking for someone who knows what they are doing as far as getting shock lengths right and castor correction. Not someone who uses trial and error.

Not like the last time I got the six inch done by a large company.....
There idea of service was fit the kit, then just keep stuffing around with it till you get it right. I also had to go back after they got spring and shock lengths miss matched.
Thanks
Steve
Top
Posts: 2526
Joined: Wed Sep 01, 2004 8:21 am
Location: Outcast Offroad

Re: recomendations for suspension in brisbane fitted

Post by Micka »

bruiser wrote:Want to do a 3 inch suspension lift on an 80 series cruiser.
Looking for someone who knows what they are doing as far as getting shock lengths right and castor correction. Not someone who uses trial and error.

Not like the last time I got the six inch done by a large company.....
There idea of service was fit the kit, then just keep stuffing around with it till you get it right. I also had to go back after they got spring and shock lengths miss matched.
Thanks
Steve
Ring JohnZ on this forum.

He LOVES cruisers :roll: - sorry John - and knows his shite inside and out when it comes to getting the max travel and best ride out of them. :D

Does not sell you an off the shelf kit and you get to try it and swap it until you get EXACTLY what you are after. :cool:

Custom springs in length and rate are no problem either - that's what he did for me. :armsup:

His number is 0418 780 611.

Tell him that Michael with the Defender gave you his number. ;)

When you call him, make sure you allow heaps of time....he answers any questions you have with about 10 possible solutions and gives you the pros and cons of each one :onfire:

Micka
Top
Posts: 72
Joined: Tue Jul 27, 2004 10:35 pm
Location: Brisbane

Post by smitty »

Talk to ludacris on er. Hes got his own shop at caboulture. Hes great :)


Cris's 4 X 4 Accessories & Suspension 0417 616 764 www.4x4accessories.com.au
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests