Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

mk\mq transfer case making ratteling noise

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
User avatar
ash
Posts: 103
Joined: Sun Oct 03, 2004 8:57 pm
Contact:
Contact ash

mk\mq transfer case making ratteling noise

Post by ash »

hi just wondering if anyone could tell me what it
might be it happens when its in 4hi or 4low at
about 20 plus kmh i thought it was a hub but it
sounds like its coming from the transfer case area
any info would be great



cheers ash
Top
Posts: 766
Joined: Mon Dec 30, 2002 3:08 pm
Location: Melbourne

Post by jtraf »

have you greased the front drive shaft?

Used to do that some times when I had it but I replaced the shaft with a new one. The old one would click and rattle when in 4wd or hubs just locked in and front shaft spinning.....

Try greasing the shaft and see if that fixes the noise.

HTH

James
Top
Posts: 848
Joined: Fri Apr 02, 2004 12:01 pm
Location: Central Victoria

Post by Patroler »

yea, sound like the above, either worn front unis or sliding joint, mine both do it when hubs are in, greasing makes it a bit better, i'd still know if i left it in though...
There are no stupid questions, but there are a LOT of inquisitive idiots
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests