Hey Everyone,
I have problem that I'm hoping you can help me with. Last weekend we took the 95XJ out to a 4WD Club fun day. It went well except for a loud and rapid knocking noise that only seemed to occur when in 4WD and accelerating hard (and possibly with the wheels turned but not sure). Given it has the OME 2" kit under it and still running standard (almost slick) tyres, do you have any idea what this might be? I have tried to get it to do the same thing on a hard road surface, but got nothing. I haven't had a chance to have a good look under it yet - just hoping for some pointers.
See you out there.
Snapey
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Nasty Rattling Noises in 95XJ
Moderator: GUtripper
COULD be something amiss in the T/case - but Bloody hard to diagnose over the net.
test it in the various t/case possies. Maybe try and identify front/rear/mid where the noise is coming from - get someone to walk/run next to you as you try to replecate.
test it in the various t/case possies. Maybe try and identify front/rear/mid where the noise is coming from - get someone to walk/run next to you as you try to replecate.
Cheers [url=http://www.wooders.com.au]Wooders[/url]
Just to update you all on this - turns out this noise was caused by a combination of the suspension lift and a stuffed passenger side engine mount (got it in one Optical!) The suspension lift with transfer case drop tilted the engine back so that the front of the engine lifted slightly. Combine this with a stuffed passengers side engine mount and the tourque created when accelerating hard (worse when turning - probably because of the engine leaning from its own weight) and the fan moved to rub on one of the air conditioner lines.
FIX - replace engine mount (thanks to Dave at Wooders Garage for that one) and wack a decent size cable tie around the offending pipe to pull it just slightly out of the way. BINGO!!!
Thank you all for your help and suggestions.
FIX - replace engine mount (thanks to Dave at Wooders Garage for that one) and wack a decent size cable tie around the offending pipe to pull it just slightly out of the way. BINGO!!!
Thank you all for your help and suggestions.
Who is online
Users browsing this forum: No registered users and 1 guest