Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
wanted wiring diagram for swift sedan 1991 g1.6b tbi
wanted wiring diagram for swift sedan 1991 g1.6b tbi
anyone got a wiring diagram for the above????
P.E.T.A
People eating tasty animals.
People eating tasty animals.
While we are on the subject does anyone have a Computer and Harness for one of these. Allready have the manifold and Throttle Body just need a computer and Harness. Could use an aftermarket computer but realy dont want to spend that sort of money. Or has anyone used another computer to run this. Maybe Camira or Pulsar?
Im currently grafting 1.6l swift TBI to my 87 sierra, and have come up with a few ?'s im hoping you guys could help me out with 
First some background info:
my rig is a total stocker(actually if you count the rust n dings its less than stock)
As i live in the country Donor vehicles where a bit scarce so i had a Suzuki wrecker in perth send me up the harness n throttle body.
I managed to find a wiring diagram on a GTIswift forum which was good!
I have made an adapter for my manifold to suit the TB its suprising how well everthing lines up ie Accelerator cable is spot on! and water lines are about as good as you could ask for on a bastardised rig.
Now onto the ?'s
1. Can i use my coil as the one i got with the harness has a big ding in it?
2.The loom has a speed sensor wire goin to the instrument cluster for economy i guess, and my / is can my cluster be mod'd similar to hen doin a 13B swap to take advatage of this ?
3.I have a set of headers to fit also as i need to weld in a plug for the O2 sensor i though it be a good opertunity to fit em they are Lukey 4-2-1 where is the best spot to fit it? any opinions?
i have a few more ? but they can wait for now
Cheers any help would be most appreciated
First some background info:
my rig is a total stocker(actually if you count the rust n dings its less than stock)
As i live in the country Donor vehicles where a bit scarce so i had a Suzuki wrecker in perth send me up the harness n throttle body.
I managed to find a wiring diagram on a GTIswift forum which was good!
I have made an adapter for my manifold to suit the TB its suprising how well everthing lines up ie Accelerator cable is spot on! and water lines are about as good as you could ask for on a bastardised rig.
Now onto the ?'s
1. Can i use my coil as the one i got with the harness has a big ding in it?
2.The loom has a speed sensor wire goin to the instrument cluster for economy i guess, and my / is can my cluster be mod'd similar to hen doin a 13B swap to take advatage of this ?
3.I have a set of headers to fit also as i need to weld in a plug for the O2 sensor i though it be a good opertunity to fit em they are Lukey 4-2-1 where is the best spot to fit it? any opinions?
i have a few more ? but they can wait for now
Cheers any help would be most appreciated
Going by this article
http://www.pirate4x4.com/forum/archive/ ... 05593.html
It seems that the 1.3tbi and 1.6tbi are the same in wiring and etc. thinking that using the usa samarai diagram would be ok.
cheers
http://www.pirate4x4.com/forum/archive/ ... 05593.html
It seems that the 1.3tbi and 1.6tbi are the same in wiring and etc. thinking that using the usa samarai diagram would be ok.
cheers
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Cheers Nicbeer
[/quote]2.The loom has a speed sensor wire goin to the instrument cluster for economy i guess, and my ? is can my cluster be mod'd similar to when doin a 13B swap to take advatage of this ?
3.I have a set of headers to fit also as i need to weld in a plug for the O2 sensor i though it be a good opertunity to fit em they are Lukey 4-2-1 where is the best spot to fit it? any opinions? is it OK to fit down the bottom at the last junction ?
Any one with any thoughts?
[/quote]2.The loom has a speed sensor wire goin to the instrument cluster for economy i guess, and my ? is can my cluster be mod'd similar to when doin a 13B swap to take advatage of this ?
3.I have a set of headers to fit also as i need to weld in a plug for the O2 sensor i though it be a good opertunity to fit em they are Lukey 4-2-1 where is the best spot to fit it? any opinions? is it OK to fit down the bottom at the last junction ?
Any one with any thoughts?
Who is online
Users browsing this forum: No registered users and 1 guest