General Tech Talk
Moderators: toaddog , TWISTY , V8Patrol , Moderators
Posts: 384 Joined: Sun Oct 20, 2002 8:26 pm
Location: Springfield/ QLD
Post
by CJer Sun Jun 15, 2003 12:13 pm
Stolen from JP mag and
www.sunrayengineering.com
These things make a stock Dana 60 look small.
Posts: 384 Joined: Sun Oct 20, 2002 8:26 pm
Location: Springfield/ QLD
Post
by CJer Sun Jun 15, 2003 12:15 pm
Full custom housing
Posts: 384 Joined: Sun Oct 20, 2002 8:26 pm
Location: Springfield/ QLD
Post
by CJer Sun Jun 15, 2003 12:17 pm
and spindle
Posts: 384 Joined: Sun Oct 20, 2002 8:26 pm
Location: Springfield/ QLD
Post
by CJer Sun Jun 15, 2003 12:21 pm
The 1480 Dana 60 joint Right is small by the 5" 1550 joint that sunray use. Spose to be able to take 4,400 lb-ft + a replacable end yoke
Posts: 384 Joined: Sun Oct 20, 2002 8:26 pm
Location: Springfield/ QLD
Post
by CJer Sun Jun 15, 2003 12:25 pm
weights in at 130 pounds less then a stock Dana 60
Posts: 4318 Joined: Tue Oct 22, 2002 8:52 pm
Location: Perth
Post
by POS Sun Jun 15, 2003 10:14 pm
That sight has some good sh!t!
Posts: 15549 Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!
Post
by bj on roids Mon Jun 16, 2003 8:01 am
now scare us with the price, (cheap house in the suburbs or a 60 front?)
the 1550 is supposed to be the bomb.....
hands and mums dont count!!!
Posts: 3299 Joined: Fri Nov 08, 2002 8:28 am
Location: Sydney
Post
by spazbot Mon Jun 16, 2003 11:28 am
are these the same dudes that were making the portal conversions doe D60s that would bolt on ????
www.overkill4x4.com
Posts: 1544 Joined: Tue Oct 22, 2002 8:37 am
Location: Performing booty fab in my Garage
Post
by Wooders Mon Jun 16, 2003 12:37 pm
Yup same dudes....
Cheers [url=http://www.wooders.com.au]Wooders[/url]
Posts: 3299 Joined: Fri Nov 08, 2002 8:28 am
Location: Sydney
Post
by spazbot Mon Jun 16, 2003 12:41 pm
nah i know avalanches work
www.overkill4x4.com
Posts: 384 Joined: Sun Oct 20, 2002 8:26 pm
Location: Springfield/ QLD
Post
by CJer Mon Jun 16, 2003 1:24 pm
bj on roids wrote: now scare us with the price, (cheap house in the suburbs or a 60 front?)
the 1550 is supposed to be the bomb.....
No price in the mag. you will have to contact them direct to get that info
But i think they will not be cheap.
Posts: 15549 Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!
Post
by bj on roids Mon Jun 16, 2003 1:52 pm
CJer wrote: bj on roids wrote: now scare us with the price, (cheap house in the suburbs or a 60 front?)
the 1550 is supposed to be the bomb.....
No price in the mag. you will have to contact them direct to get that info
But i think they will not be cheap.
yeah it was on pirates abouit 6 months ago, i think for minimal work there wasnt much change from $8k US
hands and mums dont count!!!
Posts: 15549 Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!
Post
by bj on roids Mon Jun 16, 2003 1:53 pm
Wooders wrote: Yup same dudes....
Poison Spyder.
hands and mums dont count!!!
Posts: 1544 Joined: Tue Oct 22, 2002 8:37 am
Location: Performing booty fab in my Garage
Post
by Wooders Mon Jun 16, 2003 2:17 pm
Hairy legs, bad speller & worse typist -
Cheers [url=http://www.wooders.com.au]Wooders[/url]
Posts: 15549 Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!
Post
by bj on roids Mon Jun 16, 2003 3:56 pm
Wooders wrote: Hairy legs, bad speller & worse typist -
ill bet they would still love you in jail
hands and mums dont count!!!
Posts: 1544 Joined: Tue Oct 22, 2002 8:37 am
Location: Performing booty fab in my Garage
Post
by Wooders Mon Jun 16, 2003 4:54 pm
Come on BJ no need for you to share your experiences
Cheers [url=http://www.wooders.com.au]Wooders[/url]
Posts: 15549 Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!
Post
by bj on roids Mon Jun 16, 2003 5:35 pm
Wooders wrote: Come on BJ no need for you to share your experiences
sorta left that one open a bit
(no pun intended)
hands and mums dont count!!!
Users browsing this forum: No registered users and 4 guests
(no pun intended)