Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

coil springs coming out

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1095
Joined: Sat Nov 30, 2002 7:53 am
Location: SYDNEY

Contact:
Contact thunder

coil springs coming out

Post by thunder »

With nissan trials in a week i have a small problem.
the rear coils are coming out under flex.

there are a few solutions
tie them in with (top)cable ties,hose clamps.weld em

bottom.weld a bit of metal over the bottom bit

will it fuk the spring if i weld a bit of metal at the bottom and the top.
it would look like the spring is stretching

Any other ideas? got to be quick and easy
Bar work RDG
www.rdgengineering.com
ADRENALIN TRANSPORT
Top
Posts: 2384
Joined: Mon Mar 31, 2003 10:05 am
Location: Brisbane or 169.254.243.241

Re: coil springs coming out

Post by RaginRover »

thunder wrote:With nissan trials in a week i have a small problem.
the rear coils are coming out under flex.

there are a few solutions
tie them in with (top)cable ties,hose clamps.weld em

bottom.weld a bit of metal over the bottom bit

will it fuk the spring if i weld a bit of metal at the bottom and the top.
it would look like the spring is stretching

Any other ideas? got to be quick and easy
Weld it to the hangers not the spring then you can bend them out of the way if you have to change the springs out

Tom
Top
User avatar
Tiny
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Contact:
Contact Tiny

Re: coil springs coming out

Post by Tiny »

RaginRover wrote:
thunder wrote:With nissan trials in a week i have a small problem.
the rear coils are coming out under flex.

there are a few solutions
tie them in with (top)cable ties,hose clamps.weld em

bottom.weld a bit of metal over the bottom bit

will it fuk the spring if i weld a bit of metal at the bottom and the top.
it would look like the spring is stretching

Any other ideas? got to be quick and easy
Weld it to the hangers not the spring then you can bend them out of the way if you have to change the springs out

Tom
agree weld a clip to the spring mounts
If the above post did not offend you in any way please PM me so I can try harder!!
Top
Posts: 1768
Joined: Sun Mar 14, 2004 11:51 am
Location: Weipa

Post by crankycruiser »

If u jsut weld a keeper to the bottom spring perch then the top wil locate itself when it goes bac in... that way itt wont strech ur spring
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 4 guests