Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

vg30 terrano cutting out under low revs

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 4
Joined: Tue Oct 25, 2005 7:38 pm
Location: adelaide

vg30 terrano cutting out under low revs

Post by plot »

hey people, wondering if anyone can help me out with this. car ran fine and then had my cataletic converter removed and now started running likke crap two days later. replaced plugs, dizzy cap, button, leads not coil yet any suggestions would be great,,,, cheers plot.
Posts: 172
Joined: Fri Apr 01, 2005 8:33 am
Location: Adelaide, South Australia

Post by TinyGQ »

it could be that you bought a dodgy terrano, maybe the driver?? hehe sorry, i have no idea dave!
2008 Ford Ranger Supercap XLT
Posts: 86
Joined: Sat Nov 08, 2003 2:02 pm
Location: yarrawonga northen victoria

Post by buger man »

Go back to were you took the cat off andre check every thing from there .
Could you have knocked a vac hose off ?
is the MAF sensor wires on ?
has it got a engine temp sensor and is it still conected ?
apart frm this it beats the shit out of me :!: :?
2001 pathfinder tjm(nissan ) alloy b/bar hella 160 d/lights ARB h/light loom , ipf d/light loom GME TX3400 UHF , 2 power outlets in back

www.yarrawongamulwala.com.au
Posts: 4
Joined: Tue Oct 25, 2005 7:38 pm
Location: adelaide

Post by plot »

if the temp gauge was still conected should it be disconected because i removed the cat? excuse the ignorance but ive tried every vacume hose and checked as many wires as i understand and this has been going on for over three weeks, i just want my shit back on the road..... cheers for the reply mate. :? :?
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests