Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

33"s and power loss

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 201
Joined: Wed May 12, 2004 11:51 am
Location: Geraldton, Western Australia

33"s and power loss

Post by Adomw »

Lads,

I'm thinking on 33s, but I noticed a bit of power loss when I went to 31s from the original 29s

Has anyone fitted 33s without replacing the CW&ps?

If I had to change the CW&Ps what ratios are available?

Ado
JK Unlimited Rubicon
2" lift
Dual locked, 1:4 crawler gears, swaybar disconnect
Stock and loving it
Mods to come
Top
Posts: 35
Joined: Thu Jul 01, 2004 11:36 am
Location: philippines

Post by KCboy »

go ahead and change to 33s, my god u have a manual 3.5 gas engine with front and rear lockers..... go change to 33s....me i have a 2.5 intercooleer diesel with 2.5in lift and i changed to 33s. in your case there will be power loss but i assure you, it's gonna be very minimal. :)
Top
Posts: 90
Joined: Tue Aug 16, 2005 2:53 pm
Location: Wellington NZ

Post by doddzee »

i run 33's daily and there are no power problems. i have run 35's and it spins them fine aswell.
Top
Posts: 35
Joined: Thu Jul 01, 2004 11:36 am
Location: philippines

Post by KCboy »

the power loss is so minimal it's not worth the thought. :)
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 1 guest