Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Glenn's boost gauge & rock sliders

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 315
Joined: Thu Jul 29, 2004 6:53 am
Location: South Australia

Glenn's boost gauge & rock sliders

Post by cookie monster »

glenn_c said it was ok for me to post some pics of his boost gauge and also of his rock sliders, so here goes

Image

Image

Image

Image

cookie monster
99 GU Patrol Wagon 4.2td
Top
Posts: 421
Joined: Thu Apr 15, 2004 11:47 pm
Location: Brisbane

Post by grumpy221 »

nice sliders ......is that 10mm plate under the rear?
91 Pajero GLS
32 BFG'S
and a lot of scratches
I Hate Lantana!!!!!
Top
Posts: 104
Joined: Wed Feb 16, 2005 2:32 pm
Location: Gold Coast

Post by glenn_c »

Thanks Cookie,
The silders are made from 50mm x 25mm RHS, on the rear there are two pieces welded together to make 100mm x 25mm and best part is they work great.
Regards Glenn
Pajero GLX 2.8td 255/85/16 BFG muds 265/75/16 BFG AT's, articulator, 2.5inch lift, ball joint flip, rear sway bar disconnect and lots of mods.
Top
Posts: 104
Joined: Wed Feb 16, 2005 2:32 pm
Location: Gold Coast

Post by glenn_c »

Thanks Cookie,
The silders are made from 50mm x 25mm RHS, on the rear there are two pieces welded together to make 100mm x 25mm and best part is they work great.
Regards Glenn
Pajero GLX 2.8td 255/85/16 BFG muds 265/75/16 BFG AT's, articulator, 2.5inch lift, ball joint flip, rear sway bar disconnect and lots of mods.
Top
Posts: 8
Joined: Wed Aug 24, 2005 8:50 pm
Location: Hobart, Tasmania

Post by NL97 »

Hey Glenn they look good. I assume the main sliders are from 50x25mm too? What type of checker plate is on top?

Also... what are the two bolts (?) I can see near the driver's door area?

Cheers,
Pete.
Peter

1997 LWB NL Pajero
Standard... for now
Top
Posts: 8
Joined: Wed Aug 24, 2005 8:50 pm
Location: Hobart, Tasmania

Post by NL97 »

Hey Glenn they look good. I assume the main sliders are from 50x25mm too? What type of checker plate is on top?

Also... what are the two bolts (?) I can see near the driver's door area?

Cheers,
Pete.
Peter

1997 LWB NL Pajero
Standard... for now
Top
Posts: 104
Joined: Wed Feb 16, 2005 2:32 pm
Location: Gold Coast

Post by glenn_c »

Yep the main sliders are 50 x 25 mm inboard vary vertical and outboard horizonal. The bolts were for air tank but I changed my mind latter.
Regards Glenn
Pajero GLX 2.8td 255/85/16 BFG muds 265/75/16 BFG AT's, articulator, 2.5inch lift, ball joint flip, rear sway bar disconnect and lots of mods.
Top
Posts: 104
Joined: Wed Feb 16, 2005 2:32 pm
Location: Gold Coast

Post by glenn_c »

The top is just thin alloy checker plate screwed on the top for a step.
Pajero GLX 2.8td 255/85/16 BFG muds 265/75/16 BFG AT's, articulator, 2.5inch lift, ball joint flip, rear sway bar disconnect and lots of mods.
Top
Posts: 421
Joined: Thu Apr 15, 2004 11:47 pm
Location: Brisbane

Post by grumpy221 »

50 x25 but how thick 4mm?
91 Pajero GLS
32 BFG'S
and a lot of scratches
I Hate Lantana!!!!!
Top
Posts: 421
Joined: Thu Apr 15, 2004 11:47 pm
Location: Brisbane

Post by grumpy221 »

glenn_c wrote:Thanks Cookie,
The silders are made from 50mm x 25mm RHS, on the rear there are two pieces welded together to make 100mm x 25mm and best part is they work great.
Regards Glenn

these r 25mm thick ????
Image
91 Pajero GLS
32 BFG'S
and a lot of scratches
I Hate Lantana!!!!!
Top
Posts: 1423
Joined: Thu May 26, 2005 7:00 pm
Location: Central Coast, NSW

inch

Post by klrevo »

yeh i rekon, thats exactly what i beent hinking ever since i seen them, that exhuast would typically be about 2" and those sliders are not half of that? is this correct glenn, are they 25mm???? :?

dean ;)
Top
Posts: 104
Joined: Wed Feb 16, 2005 2:32 pm
Location: Gold Coast

Post by glenn_c »

The back sliders are actualy 100 x 20 mm x 3 mm thick (the thickest you can get) the exhaust is 2.5 inch.
Glenn
Pajero GLX 2.8td 255/85/16 BFG muds 265/75/16 BFG AT's, articulator, 2.5inch lift, ball joint flip, rear sway bar disconnect and lots of mods.
Top
Posts: 1423
Joined: Thu May 26, 2005 7:00 pm
Location: Central Coast, NSW

sliders

Post by klrevo »

yeh fair enough, thanks for that, just dont look that thick, they do look awesome though :D

dean ;)
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 1 guest