Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

pitman bar chassis mount and welding...

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 709
Joined: Thu Sep 22, 2005 7:49 pm
Location: campbelltown

pitman bar chassis mount and welding...

Post by Mousie »

hey i have mannaged to break the chassis mount off the steel has split at the bottem of the chassis rail
is this ok to weld back on ?


cheers
R.A.G, Ruff As Gutts 4x4 club :P
http://www.rag4x4.com/
Top
Posts: 568
Joined: Fri Nov 01, 2002 10:11 pm
Location: cranebrook, NSW

Contact:
Contact Ryan

Post by Ryan »

hey dude let me know how u go with this as i need the same thing done on the front of my GQ :?
Top
Posts: 709
Joined: Thu Sep 22, 2005 7:49 pm
Location: campbelltown

Post by Mousie »

are you near campbelltown ? were welding mine back up and getting a bit of steel plate to use as reenforcemnt i`ll let u know how we go

the good old electric 130 amp welder should do the trick just nice
R.A.G, Ruff As Gutts 4x4 club :P
http://www.rag4x4.com/
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

as this is a chassis, id be recomending a welder with a higher out put for better penetration, which will leave you with a much stronger weld, especially seening as thou you will need to weld verticle,
Last edited by ozy1 on Sun Oct 30, 2005 9:14 pm, edited 1 time in total.
Top
Posts: 568
Joined: Fri Nov 01, 2002 10:11 pm
Location: cranebrook, NSW

Contact:
Contact Ryan

Post by Ryan »

im in penrith but will go anywhere if its at the right cost lol

i need pretty much the same, welded and plated up then bracket welded back on, also need some strengthening round the steering box mount
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests