Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

spring over on a 60

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 3
Joined: Sun Sep 18, 2005 8:56 am

spring over on a 60

Post by 60style »

i need to no what i need to get and do so i can do a spring over. can any one help?
Posts: 1453
Joined: Tue Jul 12, 2005 10:13 pm
Location: Melbourne, Victoria

Post by wrksux »

there is a similar post already in toyota forum
Posts: 510
Joined: Fri Mar 26, 2004 7:58 pm
Location: vic

Post by mudtoy »

Fairly straight forward as long as you have your wits about you and some understanding of pinion angles, drive shaft angles, required shocker dimensions, track bar geometry, engineerable hi steer components and spring operation.

Cutting and welding the mounts is common sense but be careful to keep the front mounts parallel with the old ones. The rear can be tipped up slightly. You will also need a rear traction bar because of the differing dynamics, forces and angles working on the softened leaves (reduce the number of leaves in each pack so that it is not a stupid 10 inch lift but is a managable 4 or 5 with flat super flexy packs).
www.4wdtv.com.au
SPOA FJ40, 400hp stroker, ARB locked x2, Silverstones, Superwinch, Narva lights, EFS springs, 1284 RTI...
Posts: 1031
Joined: Sun May 01, 2005 10:22 pm
Location: Newcastle 2300

Post by joel HJ60 »

wrksux wrote:there is a similar post already in toyota forum
http://www.outerlimits4x4.com/PHP_Modul ... hp?t=58250
[b]1985 HJ60[/b]

[url]http://forum.ih8mud.com/60-series-wagons[/url]
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest