Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

quick Q...turbo's

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1076
Joined: Tue Jul 27, 2004 8:49 am
Location: cashmere

quick Q...turbo's

Post by eliteforce32 »

need to no realy quickly wether or not the t25 turbo will bolt on in place of the ct20 of a 2lt? will all the lines be the same, if not which one need to be modified :armsup:

cheers
Eliteforce Heavy Fabrication
Proud supporter of these businesses:-
Pig Dog Shop(hunting)- Greg 0448024776
CrispProducts(Racetec Gauges)-Chris(pm him)
Fourbies at Moorooka- Ryano
Top
Posts: 588
Joined: Wed Mar 09, 2005 7:04 pm

Post by gotoy »

Why do you wanna change the ct20 for a t25?
Top
Posts: 1076
Joined: Tue Jul 27, 2004 8:49 am
Location: cashmere

Post by eliteforce32 »

because :finger: :armsup:
Eliteforce Heavy Fabrication
Proud supporter of these businesses:-
Pig Dog Shop(hunting)- Greg 0448024776
CrispProducts(Racetec Gauges)-Chris(pm him)
Fourbies at Moorooka- Ryano
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

pretty much everything is different. the biggest problem is the exhaust flange is different (toyota is square, garrett is rectangular), you will probably have issues mounting the wastegate actuator once the turbo is clocked to suit the toyota orientation - it's nowhere near a bolt-in swap. but it is probably doable.
Free air locker to the first 20 callers!
Top
Posts: 3299
Joined: Fri Nov 08, 2002 8:28 am
Location: Sydney

Post by spazbot »

has anyone compared the ct20 to a ct26, how much do that differ ?????
www.overkill4x4.com
ph 94766137
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

spazbot wrote:has anyone compared the ct20 to a ct26, how much do that differ ?????
the CT26 is a lot bigger, way too big for a 2.4/2.8, and there is a lot of trim variation in both. not sure whether the flage size is the same or not.
Free air locker to the first 20 callers!
Top
Posts: 1076
Joined: Tue Jul 27, 2004 8:49 am
Location: cashmere

Post by eliteforce32 »

so there is not clean swap for an upgrade in turbo's?
Eliteforce Heavy Fabrication
Proud supporter of these businesses:-
Pig Dog Shop(hunting)- Greg 0448024776
CrispProducts(Racetec Gauges)-Chris(pm him)
Fourbies at Moorooka- Ryano
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

eliteforce32 wrote:so there is not clean swap for an upgrade in turbo's?
I don't think there's a bolt in solution, no. turbo shops would be able to high flow your CT20, in fact it may well be possible to put a CT26 compressor wheel and housing on a CT20 which would make it move more air, or you could probably have the housings machined and garrett wheels put in there.

maybe ring around importers and see if you can get a CT26 with a stuffed turbine to see if you can swap the compressor side over?
Free air locker to the first 20 callers!
Top
Posts: 588
Joined: Wed Mar 09, 2005 7:04 pm

Post by gotoy »

eliteforce32 wrote:because :finger: :armsup:
?? :shock:
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest