Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Diff Ratio for 33 inch tyres

Tech Talk for Rover owners.

Moderator: Micka

Post Reply
Posts: 2621
Joined: Mon Nov 29, 2004 7:46 pm
Location: Springwood, Between Brisbane and GC

Diff Ratio for 33 inch tyres

Post by Suspension Stuff »

I have an 89 Rangie with a ZF auto and I am going to do the Toyota centre conversion when funds permit.

I am running 33 inch tyres and I plan to go for the 4.3 ratio instead of the 4.1 to give me a bit more low down performance. The 4 speed auto ZF seems to run pretty low revs at 100km per hr.

Do you think it will rev too hard at 100kph with the 4.3 ratio's or what?????

Thanks from Shane.
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

4.1s would be ok, (i was running 37s with 3.54) and it wasnt to bad.
but hey slower is better, so 4.3 would be my choice, but i beleive they may be harder to come across.
Posts: 32
Joined: Tue Oct 11, 2005 9:29 pm
Location: albany wa

Post by big_yella »

speaking of 33 inch tires...will standard amge rover 10 spline diffs and axles hold up to 33's?
Posts: 2621
Joined: Mon Nov 29, 2004 7:46 pm
Location: Springwood, Between Brisbane and GC

Post by Suspension Stuff »

If you drive like a girl they might. I have wheeled twice since fitting 33's and I have broken 3 diffs and twisted the right hand side inner axle. They didn't brake in the crownwheel and pinion but in the centre pin in 2 of them and in the output cogs in the 3rd. In their defence, they were old diffs. The twisted front axle could still work if desperate.
My rear 10 spline axles are still good.
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Posts: 369
Joined: Tue Sep 06, 2005 6:16 pm
Location: Melbourne

Post by RangingRover »

Well, I've been out once in my 84 rangie which is stock other than lift, with 34x11.5 Jungle Trekker 2s, gave it a fair bootful couple times in second, and broke nothing but a steering damper....... I think it depends a lot on the condition of your car......
84 Rangie, 3 inch spring lift, 2 inch body, Megasquirted 4.6, R380, rear Maxi, 34x11.5 JT2s. Simex FM installed.
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Post by cloughy »

Drive like a panzy and they will last longer but it's only a matter of time,they WILL break eventually with that sort of rolling diameter and if you ain't broken your standard centre or axles in the rear you must be driving like the rule says you should. However the front generally will cope for quite some time and reasonable abuse.All pending of the condition in the first place.
Wanted: Car trailer or beaver tail truck, let me know what you got
Posts: 2621
Joined: Mon Nov 29, 2004 7:46 pm
Location: Springwood, Between Brisbane and GC

Post by Suspension Stuff »

OK so does any body know what Hilux's come out with the 4.3 ratios??
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

4WD Stuff wrote:OK so does any body know what Hilux's come out with the 4.3 ratios??
bundera i beleive. But could be wrong just sounds familiar.
diesel models as they had the 4.3 diff ratio.
Posts: 2621
Joined: Mon Nov 29, 2004 7:46 pm
Location: Springwood, Between Brisbane and GC

Post by Suspension Stuff »

So does that mean I can get the 4.3 ratios front and rear out of a Bundera or 100 series and rear out of 4 Runner. How about the toyota surf. Is this just the petrol models???

Shane
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Post Reply

Who is online

Users browsing this forum: No registered users and 29 guests