Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

wanted

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 1107
Joined: Wed Jul 20, 2005 6:44 pm
Location: Melbourne

wanted

Post by hudson44 »

Does anyone have for sale a pair of vacuum solenoids to activate the front free wheeling hub for an NJ or know of anywhere near the Gold Coast that has a set?
The thieves at mitsi want $250 for them and the best i can do 2nd hand is $100!
Any help would be great!! :!:
Top
Posts: 1084
Joined: Sun Apr 04, 2004 9:33 pm
Location: Aotearoa

Post by J Top »

For $250 leave it permanantly engaged and fit a pair of Triton FWHs
J Top
Top
Posts: 1836
Joined: Wed Aug 11, 2004 10:41 am
Location: Brisbane

Post by badger »

i bought a set of air solenoids from a company called smc
cost me 132 all up and they are brass boddied and shoulkd outlast the rest of the car :)
Top
Posts: 1836
Joined: Wed Aug 11, 2004 10:41 am
Location: Brisbane

Post by badger »

i bought a set of air solenoids from a company called smc
cost me 132 all up and they are brass boddied and shoulkd outlast the rest of the car :)
Top
Posts: 167
Joined: Wed Jul 21, 2004 10:23 pm
Location: Tassie

Post by GREGGO »

I tried to find secondhand locally when one of mine failed but couldn't do any good. They are very dear to buy new but at least it is a bolt off, bolt on arrangement which means your've only got to worry about getting the hoses right.

:? :?
Shorty Gen2, lots of stuff and more to come!
Top
Posts: 104
Joined: Wed Feb 16, 2005 2:32 pm
Location: Gold Coast

Post by glenn_c »

What about just fitting Manual Free Wheeling hubs and not don't worry about the soleniods. MFW hubs save your cv joint boots. The auto hub only unlockes one axle, MFW hubs unlock both axles and cost about the same as the soleniods.
Regards Glenn
Pajero GLX 2.8td 255/85/16 BFG muds 265/75/16 BFG AT's, articulator, 2.5inch lift, ball joint flip, rear sway bar disconnect and lots of mods.
Top
Posts: 158
Joined: Fri Jul 16, 2004 11:20 am
Location: Brisbane QLD

Post by muttis3LV6 »

Badger how do i get hold of smc?
Cut down Sierra cab on extended LWB chasie running, Hilux front and Bundy back, with a 4AGZE should be finished about umm soon. A 60 Series work truck and some go fast toys too.
Top
Posts: 1107
Joined: Wed Jul 20, 2005 6:44 pm
Location: Melbourne

Post by hudson44 »

Ended up scoring some (eventually) from my local wrecker we use at work for pretty cheap.... no more flashing lights!! And she even comes straight out of 4wd where she used to take ages before. Stoked!
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 1 guest